PCS D&MTX 2KW pro series

Description

Professional 2000 Watt Stereo FM Transmitter with on-board limiting.

PCS D&MTX2KW is a professional  FM Stereo transmitter with an on-board
stereo generator, advanced audio processing/limiter which covers the entire
87.5-108 MHz Broadcast Band.

This transmitter features a highly efficient, fully solid state FM-modulated
transmitter with up to 2200W output. Advanced digital circuitry protects the
system against high reflections, voltage overload, high SWR, high temperature,
over current, short circuit and over-modulation. All of the transmitters parameters
are displayed on our large digital front panel control.

The units amplifier (4 x BLF574’s) is mounted to a massive 14″x10″x2″ heat sink and force cooled by a UF6030 industrial fan system delivering 177cfm with a low 50dB noise level and filtered through our 2kW silver coiled Low Pass Filter.

Advanced FM Technology places this 2K in the range of Crown Broadcast/OMB/BW
but at a fraction of the price, we believe our complete new range of transmitters/amplifiers
regardless of band FM/UHF/VHF exceed the quality and specification of the top
manufacturers, we back this with a full 1 year warranty against manufacturer
defect, for a small investment we can extend the warranty up to 3 years.

Technical specifications:
-Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 2000W ±0.5 dB (max)
-Max reflected power: 150 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50ohm;
-RF output connector: 7/16 DIN type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10K/600ohm, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10K
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
– I/O liner: Disable RF, Forward power
– Mains supply requirements: 230 Vca ±15% 50/60 Hz 4800 VA/3600W @ 2000 W output
– Operating temperature range: 0÷35° C recomm. -10÷45 °C max.
– Dimensions without handless: 266 x 445 x 600 mm (H x W x L) rack std. 19” 6H
– Weight: ca. 54 Kg

IMPORTANT NOTE:
PCS D&M units are drop-shipped directly from facility in Asia. We will not charge VAT to EU customers, but
you may have to pay VAT or import tax as the unit enters your country. Units have one year warranty, shipping cost under warranty is covered by customer.
For additional info and prices please ask for a quote here.