Universele versterkerbeheerbord V5.0

Description

Nuwe model van ons Switserse-mesversterkerbeheerbord

New version 5.0 with PC remote control and up to four external voltage/current sensors! Whatever make or model your current RF amplifier module might be, this controller board can be used to control it. It lets you monitor output power, reflected power, up to 4 supply voltages and up to 4 currents, 2 separate temperatures and drive level. I also lets you control output power, set fan activation temperature and set a number of alarm levels. It also supports slow power-up and automatic level control. And yes, it also provides LC-filtered 13-15V DC voltage for your optional exciter and fans.

BELANGRIK: Spesifikasies is onderhewig aan veranderinge, sagteware is nog onder ontwikkeling, so sommige spesifikasies kan enige tyd sonder kennisgewing verander. Versending in Januarie 2019!

What’s new since version v4.0?:
– Voltage extended to 75-80V max
– Auto-speed main fan (when used with breakout board V2 – ETA Autumn 2023)
– Redesign of the main board
– 1W on-board wideband linear amplifier (special version of board)
– Optional opto-isolated controlled resistive element for remote control of mains power supply
- Volledige rekenaarafstandbeheer via USB, RS232 of Ethernet (koop uitbreidingsbord)
– Supports up to 9KW modules (ask for more, if needed).
- Ondersteuning vir baie lae-vlak bestuur toepassings (DAB+)
– 4×16 LCD met roterende enkodeerder
– Support for HAM bands (PTT input)
– DIGIAMP-koppelvlak met PWR/SWR-bakkiebord beskikbaar as opsie
- Verskaf positiewe en negatiewe voorspanning deaktiveer seine en beheerspanning

Kenmerke:
– Supports 17V-80V mains power supply units.
- Stadige aanskakeling (sagte begin)
- Seleksie van dalende / stygende modus
– 2 temperatuurmeters met twee temperatuuralarms
- 4 spanningsmeters (benodig 2 sensorborde, slegs 1 word saam met die eenheid gestuur)
- 4 stroommeters (benodig 2 sensorborde, slegs 1 word saam met die eenheid gestuur)
- RF-aandrywingstaafgrafiek met alarm
- Verskaf positiewe en negatiewe voorspanning deaktiveer seine en beheerspanning
- Drie vlakke van rigtingkoppelaarsensitiwiteit
- Ondersteun digiamp-koppelvlak (dieselfde as max pro exciters

Tegniese spesifikasies::
– Netvoeding-uitsetspanning: 17-55V
– Aan boord DC/DC: 12-15V gestabiliseer, 2A
- Krag/SWR-uitleesreeks: 5KW maksimum (vra vir opgradering)
- Kragbeheermeganisme

Wat is ingesluit:
– Control Board V5.0
– LCD-beheermodule 4×16 groot
– 2x 10K temperatuursensor, nie bedraad nie
– UI-sensorbord, een stuk, met 6-pen plat kabel

Beheerbord beheer die uitsetkrag van die versterker op verskeie maniere:
– It has an on-board low-level variable attenuator that can be use for low-level signals such as for DAB+ amplifiers. About 10mw is max for this method.
– It creates a control voltage that can be used to control either power supply or amplifier (if they have such an input). Range of this voltage is adjustable and even be negative. When negative this voltage can pull low bias of an amplifier (a separation diode must be installed so bios can only be pulled low).
– It creates opto isolated variable resistance that can also be used to control power supply or anything else (requires opto variable resistor which needs to be purchased)
- Polariteit van hierdie seine is konfigureerbaar (dit kan styg of daal).
– Amplitude en vlak van beheerspannings kan ook gekonfigureer word

Waarskuwing: Dit is nie 'n produk vir beginners nie, 'n redelike hoeveelheid kennis word verwag.

'n Filter vir FM-band met stroommeter en digiamp-koppelvlak is beskikbaar hier.

Om 'n geskikte saak te soek: hier.

Om te soek na 'n geskikte hoofkragtoevoer en ander bykomstighede, kyk hier: hier.

We reserve the right to change product specifications at any time without notice.