CYBERMAXFM+ BE+ 1W 15W 25W 50W and 100W

描述

黑色版配备新型高性能高级显示屏，保修 5 年

The new Black Edition (BE+) series FM exciter brings completely new advanced graphics display with many new features such as web control interface, ethernet connectivity, two-color VU meter, smooth rotary button operation and full control over every aspect including RDS. Sharp low pass filter, great stereo separation, fantastic reliability and tight MPX control with several limiters were carried over from the previous models. With this new OLED display and new great looking enclosures with improved ventilation it seemed completely logical that warranty period would be extended to 5 years **.

This unit is perfect for demanding broadcasters. No tuning is necessary, design is entirely wideband. All you have to do is set the frequency and output power, the rest is optional. SWR, temperature and polarity protection make it difficult to destroy the unit. Unit is housed in a brand-new 1H professional 19″ rack, new design is lighter and RF tight (does not leak RF). It is rugged and made for 24/7/365 operation. Each unit has a wide-angle high contrast OLED display.

Those who use streaming sources to stream your audio will be happy to hear that as an option we also offer industry – standard streaming service receiver which also reads MP3 files from USB port at the back. What is even cooler is that the name of the stream or song name (if transmitted by stream operators) will be displayed on the display and also sent out with RDS. Instructions how to set this up are in the manual for the LCD display.

 

What’s new in BE version:
– Bright 122×32 graphical LCD with rotary encoder, USB and Ethernet ports.
– Classical two-color LED-based VU-meter and forward/reflected power indicator.
– Remote control via Ethernet and web browser as standard, possible even from mobile phone
– RDS fully configurable via OLED display and web interface
– RDS is also supported via industry-standard UECP interface
– RDS can now substitute special national characters by standard recognizable by all receivers (if desired)
– RBDS and RDS are both supported
– Time update via Internet to always ensure precise CT RDS time with very precise implementation of CT algorithm. With automatic daylight savings switching.
– Firmware of all sub-systems can be upgraded via USB interface. If we release an update or a new feature you will be able to install it.
– Optional streaming and Mp3 playback which can also transmit song name via RDS
– Calibrated two-color VU meters for power, reflected power and audio level
– 改進了 MPX 電平控制（在多個點引入限制）。
– MPX level adjustable from outside via a hole next to XLR connectors at the back
– 100 級功率調節步驟
– 基於百分比的功率調整（50% 現在將給出大約一半的輸出功率，V2 可以給出非常近似的結果）
– USB digital audio input (MPX mode now features 192KHz conversion rate)
– Optional AES/EBU in MPX audio input models (later it will also be available in stereo models)
– 模塊化結構，大多數模塊無需焊接即可輕鬆更換
– Easy change of frequency or any parameters via display or web interface, friendly user interface
– 高性價比、節能、輕、小、實用
– 1W version does not have any fan and is completely silent, 50W and 100W version have much better cooling than previous versions

我可以通過遠程控制更改哪些參數？
Frequency, output power, various alarms, network parameters, time settings, audio input selection and levels, DSP parameter and RDS settings can be changed via Ethernet in web browser. No software installation is needed, just connect your transmitter to local Ethernet and open web browser to access all the settings. Check the manual for more info. Below is a small sample of the interface.

如何連接發射器、天線和音頻源？
請看下圖（點擊放大），查看一個帶有一些工作室項目的漂亮廣播電台的示例。在此頁面底部查找可用於設置廣播電台的其他項目的鏈接（我還需要什麼但不包括在內？ 和 我可以使用什麼作為音頻源？).

技術規格：
射頻部分
– Output power: 1W to 100W depending on the model, easily adjustable via LCD display (100 steps)
– 輸出阻抗50Ω不平衡，全輸出時VSWR小於2:1
– 輸出連接器：BNC 母頭
– 頻率範圍 87.5 至 108MHz
– PLL step 50KHz
– 射頻雜散 > -85 dBc @ +- 1MHz（最小值）不在承運人范圍內
– 射頻諧波 > -60 dBc（最小值）、-70dBc（典型值）
– 監控 LED：開機、SWR/TEMP/PLL 警告
– 調製能力：FM
– RDS support: Yes
– RDS CT accuracy: -+0,1 seconds
– Supported RDS groups: PS, RT, CT, AF, EON, PTY, TA, TP, ECC, DI bits, UECP interface

音頻部分
– 音頻連接器：BNC（MPX 輸入）、RCA、XLR 和 USB
– MPX 版本的 192KHz USB 音頻輸入
– 所需音頻電平：4dBu（1.23Vrms @ 0db 增益）、-10dBu（0.316Vrms @ +14dB 增益），寬範圍可調
– 音頻輸入阻抗：10Kohms 電阻式，平衡
– 預加重平坦，50 或 75usec
– 諧波失真（THD）<0.1%
– 立體聲分離度：>65dB
– 模式：立體聲/單聲道，可通過 LCD 顯示屏調節或通過 PC 遠程調節
– 頻率幅度：0.5dB，30Hz – 15kHz

一般的
– 環境溫度：-5° 至 +45°C
– Power supply: 15V(ordered separately, current rating depending on power)
– 標準19英寸1HE機架，125毫米深（約5英寸）
– 重量約4kg（體積）

Note: BE units are available in 2 versions.
– 帶 MPX 輸入（例如來自 STL 接收器或外部 DSP 處理器）
– 立體聲 DSP/RDS 版本，帶 DSP 立體聲編碼器加 RDS

型號名稱	數字信號處理器 處理器	RDS 處理器	卡儂 輸入	單位全名
BE MPX	不	不	是的	CyberMAXFM+ BE+ MONO MPX 192KHz USB
BE STEREO + RDS	是的	是的	是的	CyberMaxFM+ BE STEREO DSP+RDS

包括什麼？
– 發射機
- USB電纜
– Short Ethernet cable
– Mains power supply and mains cable must be ordered separately (they are listed below transmitters, get the one for your power level)! The reason is that these units can be battery powered (car battery for example), they are relatively common standard items and many have them already. Mains cables are standard desktop PC type and vary from country to country so we don’t know what type is used where you live (and sometimes in the end the unit ends up somewhere else, not where we ship it). Also, these are industry standard.

我可以預期的範圍是多少？
您可以在本指南中閱讀有關範圍的更多信息 這裡。

什麼是RDS？
無線電數據系統, basically it displays station name and sometimes song name and similar information on a compatible radio receiver. Very popular in Europe
and also in the US.

IP 音频流，可通过 USB 播放 MP3
This add-on card lets you receive internet audio streams or play MP3 files from USB drive. This is basically industry-standard Barix IP module inside your transmitter. Especially cool is that the stream source often also transmits song name and when this is the case the RDS encoder can also transmit song name and it can be displayed on the LCD. Read the manual to see how this is done. The Ethernet remote control part is not used here as the BE series has its own Ethernet interface in the front panel already.

What is MicroMPX IP stream receiver
MicroMPX is IP STL (studio-to-transmitter audio link) codec, specifically designed for FM radio. It doesn’t cause typical lossy codec artifacts (pre/post ringing, watery sound), and perfectly maintains peak control, even when using composite clipping. This eliminates the need to have an expensive high end audio processor at the transmitter site.
It transports complete MPX signal with RDS to your transmitter via internet. Stereo Tool software is needed in your studio to transmit the stream to your FM transmitters.

我可以使用什麼作為音頻源？
– 具有電話混合功能的高品質調音台，例如 這個非常受歡迎的單位.
- 带无噪音支架的专业广播麦克风
- 电脑只需将音频线插入声卡。使用一些音频调度软件。
– CD 播放器、MP3 播放器或任何其他音樂再現系統

我還需要什麼但不包括在內？
– 需要電源插頭，可在您所在的國家/地區購買（每個國家/地區有不同的電源插頭，我們不提供所有電源插頭）。這是標準電源插頭，其價格通常約為 1 US$ 或更低。您可以在任何 electronics 商店購買，例如無線電棚、電路城、任何電腦商店等。為了您的安全，請始終使用接地插頭！
– 您還需要天線，您可以訂購一根 這裡
– 您還將使用同軸電纜連接天線和發射器，您可以訂購 這裡（最長20米） 或者 這裡（20-60m） 或者 這裡 (>60m).
– 無線電必備套件 包含各種連接器和適配器以及天線分析儀，每個站都應該隨時備有這些。
– 您將需要音頻源（混音器、CD 播放器、麥克風等）。最好使用 PC 作為音頻源並運行某種音頻調度軟件，例如 Jazler、Raduga 或 winamp。 Winamp 插件（例如 rocksteady）的存在可以讓您的聲音變得更好。

我在哪裡可以購買啟動所需的所有物品（包括天線和其他物品）？
您可以查看我們的 全包式發射機套件，其中包括天線、同軸電纜和主電源。另一種方法是選擇您喜歡的 天線在這裡 和 帶連接器的同軸電纜 在这里，您可以配置自己的套餐。天线配件，如 天线分析仪 也非常受欢迎。当然还有 防雷.

**For the warranty period of 5 years some conditions apply. Warranty does not cover final transistors and shipping cost, also natural disasters and mishandling are excluded.