Radio Explorer - Trình phân tích Radio FM trên thiết bị di động

 39,99 -  1.640,00

Trong kho

Trong kho


Trong kho


Trong kho

Giá hiển thị chưa có VAT (chỉ thanh toán ở EU)

Sự miêu tả

Radio Explorer is a multifunctional, easy to use tool, designed to evaluate FM broadcast band congestion and to measure and store all of important radio broadcast parameters in a Log file. This is a stand-alone solution for running surveys – no other additional tools are needed. You can setup for observation up to 50 preselected channels. All you need to do is to get Radio Explorer in the vehicle and go. When your campaign is over just use the supplied free of charge Windows software to convert the log files into KMZ format and visualize the stored data in Google Earth. Thus you can “get the picture” of what really happens
in the field, to outline the coverage of every station comparing with competitors. Such functionality is irreplaceable when you need to analyze and tune your broadcast equipment and antenna. The Log file can be exported also as transitional format for future analyze or to keep it in record.

With a click on the button Radio Explorer becomes an excellent tool for analyzing and setup of whole broadcast equipment on the site. It can measure RF level, MPX deviation, Left & Right Audio levels, RDS and Pilot injection levels and display the measurements on large, easy to read LCD display. Easy switching between RDS/RBDS standards and measurement units makes Radio Explorer compatible for use by broadcast engineers from all around the world. For even better control and data representation connect the device to a usual Windows PC, via a USB port. You can choose between various bar-graphs, data plots, histograms and etc. A super-fast band scan mode is available and gives to you real-time live visualization of whole FM band or just small part of it with down to 5 kHz
resolution. All of device or campaign settings you can do by using software or via very intuitive and sample user interface with 5 buttons and LCD screen.

Radio Explorer incorporates a high quality FM front end with all MPX signal and RDS parameters data logger and high sensitive GPS receiver in reinforced steel box. Additional MPX input is available for monitoring as well as MPX output, left and right "program output" and AES/EBU digital audio output. Inputs are for FM and GPS antennas and for power supply. The program received can be monitored with headphones plugged into a standard 1/8″ jack with electronic volume


• FM Band 87-108 MHz Basic Spectrum Analyzer
• Selectable wide/narrow IF bandwidth
• MPX, PILOT & RDS deviation meters
• Built-in Stereo decoder; Stereo Presence Detection
• LEFT and RIGHT demodulated audio level meters
• Built-in 50-channels GPS Receiver
• Measurement results visualisation in Google Earth
• Accurate front-panel metering for local use
• Headphones audio output with volume control
• RDS and RBDS decoder
• FM/RDS/RBDS Data Logger
• RDS/RBDS Stream BER meter
• Metal Case for high RF immunity
• Full control and monitoring via USB connection
• RF and RDS Measurements (real time & average)
• Very Intuitive Application Interface


We will match any price out there.

Bạn có thấy sản phẩm này rẻ hơn ở nơi khác không? Liên hệ với chúng tôi, chúng tôi sẽ làm hết sức mình để phù hợp và đánh bại giá của đối thủ cạnh tranh.

Ứng dụng trò chuyện: chiếc_electronics,
bạn cũng có thể nhấp vào Hỗ trợ Trực tiếp trong tiêu đề của trang hoặc bạn có thể gửi e-mail trực tiếp cho chúng tôi đến email được hiển thị bên dưới:
Email shown as jpg to prevent spam

Thông tin thêm

Nhận xét

Hiện tại không có đánh giá nào.

Chỉ những khách hàng đã đăng nhập đã mua sản phẩm này mới có thể để lại đánh giá.