Universal switching mains power supply for RF amps

 29,99 574,99

In Stock
 29,99

In stock

 59,99

In stock

 59,99

In stock

 64,99

In stock

 39,99

In stock

 54,99

In stock

 94,99

In stock

 79,99

In stock

 139,99

In stock

 145,99

In stock

 154,99

In stock

 254,99

In stock

 249,99

In stock

 299,99

In stock

 369,90

In stock

 439,99

In stock

Out of stock

 574,99

In stock

Prices shown are without VAT (paid only in EU)

Description

If you are trying to construct a transmitter or amplifier you will probably need a mains power supply. There are several key parameters you will need to meet for your project, they are described below:

1.) Voltage
need a mains power supply. Most RF amplifiers need power supply rated at a voltage of 12-15V, 48V or lately also 62-65V. Check your transmitter, pallet or amplifier specifications and make sure you are using mains power supply of correct voltage rating.

2.) Current/power rating

Stronger amplifiers need more power and current. You can calculate power rating by multiplying current and voltage: P = U * I. For example a power supply rated at 48V that can supply 10A of current has a power rating of: 48V * 10A* 480W.  However be carefull, a 300W FM band amplifier will typically need mains power supply rated at 450-600W. Why? Amplifiers are not 100% efficient, a part of power is lost as heat. Also any additional circuitry such as fans, control unit with display or exciters will also take some power out of the power supply. Our advice: Look at the amplifier specifications, they specify voltage and current. Add 10%-20% more current for safety, for example for an amplifier specified at 10A use power supply rated at 11-12A. Also add current requirements of any additional items, such as fans etc. Than multiply this by voltage and you will get required power rating of your power supply. Important: TV pallets have much higher losses since they  operate in linear region so a 100W TV pallet may need 500W power supply, keep this in mind.

3.) Mains voltage
Some mains power supplies are universal and work worldwide, others only work at 110V or 220V. Make sure you get the correct mains power supply for your region.

4.) Other things to check
– Some mains power supplies are universal and work at 110-240V, but provide less power at 110V, check the specs well.
– Remote control usually serves to turn the unit on and off with a small switch connected to two pins on the power supply, this simplifies design as mains voltage does not need to be switched. Remote control in some models also makes it possible
to set output voltage with control signal, this can be used to connect our amplifier control board..
– Some mains power supplies are universal and work at 110-240V, but provide less power at 110V, check the specs well.
– Some supplies have active phase correction (PFC), others not. In EU PFC is obligatory, but in the US and many other places it is not. Supplies with PFC are typically more expensive.

Some of our mains power supplies are presented below, if you need more than one unit it may be possible to arrange a discount. Don’t see your desired power supply? Send us an email (click contact us) and ask. If you need a manual (pdf) for your power supply, email us and we will send you one after you’ve purchased the supply.

30W 12V Lambda mini power supply:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 2,5A
– Voltage rating: 12V (adjustable)
– Power rating: 30W
– Built-in fan: No
– Remote control: No
– Dimensions: 82mm x 30mm x 115mm, full metal cage
– Recommended for: FM broadcast band pallets and exciters up to around 15W

75W 12V Mean Well SP-75-12:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 6,2A
– Voltage rating: 12-14V (adjustable)
– Power rating: 75W
– Built-in fan: No
– Remote control: No
– Dimensions: 100mm x 33mm x 193mm, full metal cage
– Recommended for: FM broadcast band pallets and exciters up to around 40W

75W 24V Mean Well SP-75-24:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 3.2A
– Voltage rating: 24V (adjustable)
– Power rating: 75W
– Built-in fan: No
– Remote control: No
– Dimensions: 100mm x 33mm x 193mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 40W, TV pallets up to around 15W

100W 36V Mean Well HRP – 100 -36:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 2,9A
– Voltage rating: 36V (adjustable to 26-28V for TV)
– Power rating: 100W
– Built-in fan: No
– Remote control: No
– Dimensions: 100mm x 38mm x 170mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 50W, TV pallets up to around 20W

100W 24V Mean Well:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 4.5A
– Voltage rating: 24V (adjustable)
– Power rating: 100W
– Built-in fan: No
– Remote control: No
– Dimensions: 100mm x 38mm x 200mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 75W, TV pallets up to around 20W

150W 48V Mean Well S-150-48:
– AC Input: Universal 100V-240V (50/60Hz), range selected with a switch
– Current rating: 3.2A
– Voltage rating: 48V (adjustable)
– Power rating: 150W
– Built-in fan: No
– Remote control: No
– Dimensions: 110mm x 50mm x 200mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 80W, TV pallets up to around 25W

200W 36V Mean Well HRPG – 200 -36:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 5,7A
– Voltage rating: 36V (adjustable to 26-28V for TV)
– Power rating: 200W
– Built-in fan: Yes
– Remote control: Yes
– Dimensions: 100mm x 40mm x 220mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 150W, TV pallets up to around 40W

200W 48V PCB board only (no enclosure):
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 4,15A
– Voltage rating: 48V (adjustable)
– Power rating: 200W
– Built-in fan: No
– Remote control: No
– Dimensions: 78mm x 42mm x 127mm, no case, fits 1H
– Recommended for: FM broadcast band pallets up to around 150W, TV pallets up to around 40W
– Warning: Since there is no case dangerous voltages are present, take all safety precautions

320W 48V Mean Well SP-320-48:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 6.7A
– Voltage rating: 48V (adjustable)
– Power rating: 150W
– Built-in fan: No
– Remote control: No
– Dimensions: 115mm x 50mm x 230mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 200W, TV pallets up to around 50W

450W 48V Mean Well HRPG – 450 -48:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 9.5A
– Voltage rating: 48V (adjustable)
– Power rating: 450W
– Built-in fan: Yes
– Remote control: Yes
– Dimensions: 115mm x 40mm x 245mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 300W, TV pallets up to around 100W

600W 48V Mean Well SE-600-48:
– AC Input: Universal 100V-240V (50/60Hz), selectable by switch
– Current rating: 12.5A
– Voltage rating: 48V (adjustable)
– Power rating: 600W
– Built-in fan: Yes
– Remote control: No
– Dimensions: 125mm x 64mm x 280mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 400W, TV pallets up to around 100-150W

600W 36V Mean Well HRPG-600-36:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 17.5A
– Voltage rating: 36V (adjustable to 26-28V for TV pallets)
– Power rating: 600W
– Built-in fan: Yes
– Remote control: Yes
– Dimensions: 105mm x 64mm x 245mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 400W, TV pallets up to around 100-150W

600W 48V Mean Well HRPG-600-48:
– AC Input: Universal 100V-240V (50/60Hz)
– Current rating: 13A
– Voltage rating: 48V (adjustable)
– Power rating: 600W
– Built-in fan: Yes
– Remote control: Yes
– Dimensions: 105mm x 64mm x 245mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 400W, TV pallets up to around 100-150W

1000W 48V Mean Well SE-1000-48:
– AC Input: Universal 100V-240V (50/60Hz), selectable by wire jumper
– Current rating: 20.8A
– Voltage rating: 48V (adjustable)
– Power rating: 600W
– Built-in fan: Yes
– Remote control: Yes
– Dimensions: 127mm x 65mm x 340mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 750W, TV pallets up to around 250W

1500W 48V Mean Well SPV-1000-48:
– AC Input: Universal 90V-240V (50/60Hz)
– Certificates: UL, CE compliance
– Active PFC circuit compliance to EN61000-3-2
– Protection: Short circuit / Overload / Over voltage / Over temperature
– High efficiency up to 90%
– High power density 8.3W/ in3
– 12V/0.1A auxiliary output
– Current rating: 32A
– Voltage rating: 48V (adjustable)
– Power rating: 1500W
– Built-in fan: Yes
– Remote control: Yes, and output voltage can be controlled remotely via our amplifier control board
– Dimension: 127mm x 83,5mm x 278mm, full metal cage, fits 2H
– Recommended for: FM broadcast band pallets up to around 1200W, TV pallets up to around 400W

1000-4000W 48V Mean Well RSP-1000-48:
– AC Input: Universal 110V-240V (50/60Hz)
-Certificates: UL, CE compliance
– Active PFC circuit compliance to EN61000-3-2
– Protection: Short circuit / Overload / Over voltage / Over temperature / Fan alarm
– High efficiency up to 90%
– High power density 15.6W/ in3
– 5V/0.5A auxiliary output
– Current rating: 21A
– Voltage rating: 48V (adjustable)
– Power rating: 1000W (4000W when 4 units are paralleled)
– Built-in fan: Yes, 2x with fan speed control
– Remote control: Yes, and output voltage can be controlled remotely via our amplifier control board
– Dimension: 127mm x 41mm x 295mm, full metal cage, fits 1H
– Recommended for: FM broadcast band pallets up to around 3000W, TV pallets up to around 1000W, very compact since it  fits 1H

2400W-7200W 48V Mean Well RSP-2400-48:
– AC Input: 180V-264V (50/60Hz)
-Certificates: UL, CE compliance
– Active PFC circuit compliance to EN61000-3-2
– Protection: Short circuit / Overload / Over voltage / Over temperature / Fan alarm / AC input surge limiting
– High efficiency up to 91%
– High power density 12.5W/ in3
– 12V/0.1A auxiliary output
– Current rating: 50A (one unit) to 150A (3 units)
– Voltage rating: 48V (adjustable 10-56V)
– Power rating: 2400W (7200W when 3 units are paralleled)
– Built-in fan: Yes, 2x with fan speed control
– Remote control: Yes, and output voltage can be controlled remotely via our amplifier control board
– Dimension: 178mm x 63.5mm x 278mm, full metal cage, fits 2H
– Recommended for: FM broadcast band pallets up to around 5000W, TV pallets up to around 2000W

3000-6000W 48V Mean Well RSP-3000-48:
– AC Input: Universal 180V-240V (50/60Hz)
-Certificates: UL / CUL / TUV / CE / CB
– Active PFC circuit compliance to EN61000-3-2
– Protection: Short circuit / Overload / Over voltage / Over temperature / Fan alarm
– Alarm signal output (both relay and TTL signal)
– 12V/0.1A auxiliary output
-High efficiency up to 90%
-High power density 15.6W/ in3
– Current rating: 62.5A
– Voltage rating: 48V (adjustable)
– Power rating: 3000W (6000W when 2 units are paralleled)
– Built-in fan: Yes, 2x with fan speed control
– Remote control: Yes, and output voltage can be controlled remotely via our amplifier control board
– Dimension: 278mm x 63.5mm x 177.8mm, full metal cage
– Recommended for: FM broadcast band pallets up to around 4500W, TV pallets up to around 1500W

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.