PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Slovensko    
  Na vrh » Katalog » TV oddajniki » TV oddajniki - kit » Moj račun  |  Vsebina vozička  |  Na blagajno   
Naši izdelki
FM oddajniki->
AM oddajniki
DAB+ digitalni radio->
Material za oddajnike->
FM ojačevalniki->
FM radijske antene
TV oddajniki->
  TV oddajniki - kit
  TV oddajniki v rack ohišju
  Paketi TV oddajnikov
  Digitalni TV oddajniki
  PCS D&M digitalni oddajniki
PC oddajniki
TV antene
TV ojačevalci->
Brezžične avdio/video povez
Koaksijalni kabel in konektorji
RDS koderji
Stereo koderji
Elektronske komponente
Programska oprema
Sončni paneli
Oprema za studio->
DEVA Broadcast->
RF servis in razvoj
Kaj je novega?
Remote control IO board (USB+RS232+3xBNC) + 20cm 6-pin flat cabl
Remote control IO board (USB+RS232+3xBNC) + 20cm 6-pin flat cabl
Naši radijski vodiči
Kako začeti
Pogosto zastavljena vprašanja
Kako narediti oddajnik
Koaksialni kabel
Avdio oprema
Nove sheme
Priporočeno branje
Pričevanja kupcev
O podjetju PCS Elektronik d.o.o.
Pošiljanje in vračilo izdelkov
Trenutne zaloge
Pogosto zastavljena vprašanja
Kontaktirajte nas
Izjava o varnosti in zasebnosti
Program oglaševalcev
Informacije o oglaševanju
FAQ programa oglaševalcev
Prijava oglaševalcev
FAQ za darilne kupone
Informacije o varnosti

PayPal and credit cards accepted!

10W, all analog TV standards supported, VHF band I and III

We decided to bring out a new model of TV exciter based on technology similar to our FM exciter boards! Our new 10W VHF and 7W UHF TV transmitter is your ticket into the world of TV. With support for remote directional coupler and RF power limit so you can build 100W, 200W, 500W or stronger TV transmitter. Build your own TV studio and broadcast your own TV program! Transmit movies from your PC to your living room, re-transmit the TV program you've never been able to receive in your valley, run a college TV station, cover rural areas of Africa with TV signal from satellite stations, run a hotel cable system info pages or just have fun... this unit will keep you busy during the cold winter evenings and is sure to provide lots of fun for many months to come!
Unit is available as a populated and tested board or a rack-mounted ready-to-use transmitter. Rack mounted unit runs from 20-48V DC from mains power adapter. Optional stereo encoder board plugs into the main transmitter board to provide stereo sound and DSP processing for NTSC. Up to 10W of output power offers from several hundred meters up to about 10km of range depending on antenna type used on transmitting and receiving side. High-gain yagis on both sides might offer even more range in favorable conditions.
Unit is rugged and comes with SWR protection, made for 24/7/365 operation. Each unit has a wide-angle high contrast back-lit LCD display. Output power and channel can now be adjusted via LCD module.

Look HERE for all manuals, drivers and support.

How is the TVMAX8000+ different from the old and now obsolete TVMAX6010V?
- Support for MAXLINK II for much improved audio performance (in 1H rack you now get XLR and RCA stereo inputs)
- Header for bargraph for VU meter (External SWR and Power signal when used to drive pallets)
- Stand-by header wired to new LCD type

General features:
- Powered from 20-48V (requires 48V for full power)
- DSB AM modulation, universal all audio and TV standards
- Fits our new 19" 1H rack
- Built-in CPU for controlling and monitoring
- PC remote control via RS232, USB or Ethernet (requires IO board or ethernet expansion board)
- It can now read POWER and SWR from external directional coupler (DIGIAMP), it can also monitor amplifier temperature, voltage, current
- Adjustable TV channel (via LCD module with up/down keys)
- Easily adjustable TV and sound standard (via LCD module)
- Built-in test signal generator
- Supports all world TV standards: All PAL versions, SECAM, NTSC
- TV Channels: All VHF HIGH (175-225MHz in 125KHz steps)
- TV Channels: All VHF LOW (55-88MHz in 125KHz steps)
- SWR and TEMP protection
- Stereo sound possible with plug-in board (NTSC)
- Friendly user interface
- Output power: 10W typ, adjustable from 0 to Pmax via LCD display,
- Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
- Output connector BNC female ( rear panel )
- Frequency range: TV VHF band
- Audio connectors: RCA (cinch)
- Audio level: 1Vpp
- Video level: 1Vpp
- Audio input impedance: 10K resistive, unbalanced
- Pre-emphasis 50 or 75usec
- Regulated power supply: DC 20-48V/2A (more power at higher voltage)
- Weight: 0.8kg
- Dimensions: 100x125mm, same as TVMAX 5000+
- A fan is needed at all times (blowing across the board)

What is the DSP Stereo Encoder for USA/NTSC?
- This add-on card enables stereo sound, it was designed for NTSC system, used in USA and most of South/North America.

What is the external power/swr meter with DIGIAMP?
- This add-on card enables building strong TV transmitters, it is placed after an amplifier and makes it possible to show output power and swr on the LCD display of the transmitter. The add-on card connects to the TVMAX6000 via simple 14-pin DIGIAMP flat cable. Coming soon.

What is the USB IO board for?
- This add-on card lets you connect this transmitter to the PC via standard USB cable (not included). You can fully monitor transmitter via PC (power, frequency and other settings). 6-pin flat cable also connects BNC for Video and Audio inputs to TVMAX6000.

What is the Ethernet remote control module for?
- This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. Requires also USB IO board as it plugs into it.

What is the Predrilled LCD front panel?
- This is a square piece of aluminum with predrilled holes for LCD display, buttons and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD).

Antenna options
You can check all our TV antennas here.
This is a perfect little TV antenna for this transmitter. Some antennas are listed below.

To purchase coaxial cable and connectors for this transmitter look HERE.

Ta izdelek smo dodali na spletno stran Pet 29 April, 2007.
 *Izberite količino za vsak izdelek, ki ga želite, in kliknite gumb 'Dodaj v voziček' spodaj.
Prikazujem 1 do 17 (od 17 izdelkov) Strani rezultatov:  1 
    Ime   Model   Izberi   Cena 
TVMAX8000V+ 10W VHF HI+LO TV transmitter + basic (3-key) LCD  TVMAX8000V+ 10W VHF HI+LO TV transmitter + basic (3-key) LCD   10W, 48V 2A  199.99EUR  189.99EUR
DDV se doda na koncu
TVMAX8000V+ 20W VHF HI+LO TV transmitter + basic (3-key) LCD  TVMAX8000V+ 20W VHF HI+LO TV transmitter + basic (3-key) LCD   20W, 60V / 2A  249.99EUR
DDV se doda na koncu
Upgrade to 4x16 LCD with rotary button  Upgrade to 4x16 LCD with rotary button     18.99EUR
DDV se doda na koncu
DSP Stereo Encoder for USA/NTSC  DSP Stereo Encoder for USA/NTSC     59.99EUR
DDV se doda na koncu
3/4 ExterminatorII VHF HI 1KW + 5m coax  3/4 ExterminatorII VHF HI 1KW + 5m coax     209.99EUR
DDV se doda na koncu
VHF LO GP TV antenna +5m cable with connector  VHF LO GP TV antenna +5m cable with connector     139.99EUR
DDV se doda na koncu
PCS 170-230 (300W) GP antenna  PCS 170-230 (300W) GP antenna     29.99EUR
DDV se doda na koncu
VHF HI DIPOLE TV antenna +5m cable with connector  VHF HI DIPOLE TV antenna +5m cable with connector     99.99EUR
DDV se doda na koncu
IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable  IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable   2x flat cable  44.99EUR
DDV se doda na koncu
Ethernet remote control + cable (needs IO board w BNC)  Ethernet remote control + cable (needs IO board w BNC)     49.99EUR
DDV se doda na koncu
Replacement BLF571 LDMOS final stage  Replacement BLF571 LDMOS final stage     59.99EUR
DDV se doda na koncu
14-pin DIGIAMP flat cable (40cm, 2 connectors)  14-pin DIGIAMP flat cable (40cm, 2 connectors)     5.99EUR
DDV se doda na koncu
Pre-drilled LCD panel (rotary button 4x16)  Pre-drilled LCD panel (rotary button 4x16)     4.99EUR
DDV se doda na koncu
Predrilled LCD front panel (3-key)  Predrilled LCD front panel (3-key)     4.99EUR
DDV se doda na koncu
Software+USB IOBOARD for changing logo  Software+USB IOBOARD for changing logo     39.99EUR
DDV se doda na koncu
Transmitter keylock (optional)  Transmitter keylock (optional)     6.99EUR
DDV se doda na koncu
Switch with LED diode  Switch with LED diode     2.99EUR
DDV se doda na koncu
Prikazujem 1 do 17 (od 17 izdelkov) Strani rezultatov:  1 
Nakupovalni voziček
0 izdelkov
Hitro iskanje

Za iskanje uporabite ključne besede.
Obiščite naš forum
Zadnje objave:

Kliknite za prikaz foruma
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce Slovensko

Druge valute

Kontaktirajte nas | O podjetju PCS Elektronik d.o.o. | Podpora | Pogosto zastavljena vprašanja | Kako začeti | Pošiljanje in vračilo izdelkov
Prikaži cene v US$ | Prikaži cene v EUR | Priročniki, programska oprema in podpora

Vse besedilo na tej spletni strani, opisi izdelkov, vodiči in skripte so
last podjetja PCS Elektronik d.o.o.