PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topp » Katalog » Wireless audio/video links » Min konto  |  Handlekurv  |  Sjekk ut   
Våre produkter
FM transmitters->
AM transmitters
Special sale items
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Electronic components->
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcast->
RF service and design
Hva er nytt?
D&R AIRMATE-USB broadcast on-air console (VOIP)
D&R AIRMATE-USB broadcast on-air console (VOIP)
Våre radioguider
Hvordan starte guide
Making Your Own Transmitter
Nye skjema
Anbefalt lesning
Om PCS Electronics
Forsendelse & Retur
Tilgjengelig på lager
Kontakt oss
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Gavekort FAQ

PayPal and credit cards accepted!
STLMAX6000-8000 VHF/UHF STL modules  

Need to send your audio from studio to the remote transmitter and don't want to break your budget? Now with 10W or 25W of power and covering also UHF band! CyberMaxLink6000+ VHF/UHF Studio to Transmitter audio link is a MPX Stereo wideband FM audio system providing a high quality broadcast audio wireless bridge at accesible prices. These systems offer great value and work either in MPX or two-channel stereo mode and offer excellent overall performance.

Main features:
- Covers frequencies from 45-900MHz (specify 10MHz segment at the time of ordering, at the moment transmitters don't cover this entire frequency band)
- The transmitted and received frequency can be set by LCD display on front panel (UP/DOWN keys)
- Accesible price
- Suitable for MPX systems (stereo encoder in studio) or for 2-channel systems (2 audio channels, left+right, with 19KHz notch filter to prevent beat frequency)
- Built-in speaker driver for easy monitoring at the receiving side (speaker not included)
- Low THD distortion: the THD value with stereo or mono demodulated and deemphasized signals is negligible
- Flat frequency response
- Excellent signal to noise ratio either in mono or in stereo
- High sensitivity and RF immunity
- High adjacent channel rejection
- High frequency stability
- Integrated LCD Display: complete diagnostic and measurement front panel LCD displays

Technical specifications for transmitter:
- Frequency band covered: 45-500MHz (specify 10MHz segment at the time of ordering)
- PLL step: 100KHz
- Modulation: FM, ±75 KHz peak deviation
- Frequency stability: <±200 Hz
- Output power: 10W or 25W, adjustable from 0 to max via LCD display
- Output impedance: 50 unbalanced, VSWR less than 2:1 for full output
- RF output connector: BNC female (rear panel)
- RF Spurious: >-75 dBc @ +- 1MHz min. away from carrier
- RF Harmonics: > -50-60 dBc Standard
- Monitoring Led: Power on, SWR/TEMP/PLL error
- Audio input connectors: RCA (cinch) and XLR (DSP version)
- Audio level: 1Vpp
- Audio input impedance: 10Kohms
- Pre-emphasis: Flat, 50 or 75usec, adjustable
- Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
- MPX input frequency response: 10 to 100 KHz ± 0.15 dB
- AUX input frequency response: 10 to 100 KHz ± 0.15 dB
- Harmonic distortion (THD): > 0,1% ( 0,05% typ. )
- Channel separation: 40 dB min., 20Hz to 15kHz
- AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
- AUX channel input impedance: 10K
- Audio input connector: PCB solder and 2-pin jumper
- Power supply: DC 13.8-15V/2A
- Operating ambient temperature range: -15 to 45C (with appropriate cooling)
- Dimensions : 100mm x 125mm x 30 mm (same size as max pro 5000 series FM exciters)
- Weight: 0,4Kg

Technical specifications for receiver:
- Frequency band covered: 45MHz-900MHz (specify 10MHz segment at the time of ordering)
- Built-in speaker amplifier for easy monitoring (speaker not included)
- Sensitivity: ~1uV 10dB SINAD (varies with frequency band, falls rapidly above 600-900MHz, can be corrected with preamplifier)
- Frequency response MPX: 20 Hz to 60 KHz ±0.1 dB
- Stereo separation: 20 Hz to 15 KHz >40 dB
- 19KHz notch attenation: > 60 dB
- S/N Ratio : >65 dB @-40 dBm , 75 KHz dev. and 1 KHz mod.
- THD : 20 Hz to 53 KHz <0.3%
- Selectivity: ±160 KHz at -3 dB IF BW, ±500 KHz at -62 dB IF BW
- Image rejection: >65 dB
- Stereo audio output impedance: 50 ohm balanced
- Stereo audio output connector: RCA/CINCH female
- MPX output impedance: 75R
- MPX output connector: BNC female and XLR balanced
- Headphones output: >2x0.2 W stereo at 32 ohms
- Headphones output connector: 3.5mm stereo phone jack
- RF input impedance: 50ohm
- RF input connector: BNC Type - female
- Power: 12-15V, 1A
- Power consumption: approx 10W
- Operating temperature range: -15 to 50C
- Dimensions : RF board 100x125mm, audio breakout board 100x80mm
- Weight: 0.5Kg

- At the time of ordering please specify 10MHz frequency band, for example 210-220MHz.
- Transmitter board accepts either mono signal or composite MPX signal, which is generated by stereo encoders such as SE2000 and SE5000, you need to order one of these if you don't have MPX source yourself, otherwise you will be transmitting mono signal.

To look for a suitable antenna check: here. 
To look for a suitable coaxial cable check: here. 
To look for a suitable stereo encoder check: here. 
To look for a suitable case for transmitter board check: here. 

All our manuals and software are available here.


Dette produktet ble lagt til katalogen Sunday 17 May, 2015.
 *Valg antall for varene du vil kjøpe og velg \Legg i handlekurv' knappen.
Viser 1 til 5 (av 5 produkter) Resultat sider:  1 
    Navn   Modell   Velg   Pris 
STLMAX8000 10W STL transmitter + LCD (rotary button)  STLMAX8000 10W STL transmitter + LCD (rotary button)   50-500MHz (specify)  259.99EUR
STLMAX8000 20W STL transmitter + LCD (rotary button)  STLMAX8000 20W STL transmitter + LCD (rotary button)   50-300MHz (specify)  339.99EUR
STLMAX8000 1W STL transmitter + LCD (rotary button)  STLMAX8000 1W STL transmitter + LCD (rotary button)   500-999MHz (specify)  349.99EUR
SE8000 DSP+ stereo encoder + MAXLINK II cable  SE8000 DSP+ stereo encoder + MAXLINK II cable   For stereo STL  134.99EUR
STLMAX6000 VHF/UHF STL receiver+LCD+audio breakout  STLMAX6000 VHF/UHF STL receiver+LCD+audio breakout   50-999MHz (specify)  279.99EUR
Viser 1 til 5 (av 5 produkter) Resultat sider:  1 
0 varer

Bruk kodeord for produktet du ser etter.
Besøk vårt forum
Siste poster:

Besøk forumet
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce

Andre valuta

Kontakt oss | Om PCS Electronics | Support | FAQ | Hvordan starte guide | Forsendelse & Retur
Show prices In US$ | Show prices In EUR | Manualer, programvare og support

All tekst pa denne siden, produkt beskrivelser, guider og script
Kopirett © av PCS Elektronik d.o.o.
Laget av osCommerce