6000W 3-way FM band PTFE splitter/combiner set

Opis

6KW (6000W) 3-way pallet amplifier combiner

Make your own 6000W amplifier or transmitter with these heavy-duty 3-way combiners. Assembled and tested, ready to be installed. Heavy duty design, large and sturdy. You will need one input board, one output board and 3 identical amplifier modules of any rating from 0 to 2000W. Output combiner must be bolted to a heatsink with some airflow for cooling, input combiner can be bolted directly to an aluminum enclosure as it does not heat-up much. Surface mount construction makes installation easy.

Technical specifications output combiner:
– 86 – 110MHz
- Impedanca: 50 ohmov
– Max power per module: 2000W
– Največja kombinirana izhodna moč: 6000 W
– PTFE PCB z izjemno nizkimi izgubami; strogo nadzorovana dielektrična konstanta.
– Specifically designed for combining several RF amplifiers.
–  0.1 dB maximum power loss.
– PCB measures: 371 mm x 126.5 mm x 18 mm tall (when matching inductors are installed.)
– Complete with 1/4 inch aluminum spreader plate, 50 ohm 800W resistors, matching inductors and tuning.
– PCB is Teflon 0.125 inch thick with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
– Input return loss better than -25dB 87.5 to 108.1MHz (when  matching inductors are used)
– Output return loss better than -23dB 87.5 to 108.1MHz.

Technical specifications input combiner:
– 86 – 110MHz
- Impedanca: 50 ohmov
– Max power per module: ~15W
– Max combined input power: ~40W
– Specifically designed for combining several RF amplifiers.
– Size: 226.3 mm x 64.8 mm x 3.2 mm
– Common port return loss: better than -20dB
– Outputs return loss: better than -25dB
– Unbalance: 1 degree max

Opomba: Za povezovanje uporabite koaksialni/poltogi PTFE, primerni kabli so tukaj.  0,250-palčni polfleksibilni ročni kabel bendable 50 ohmov se dobro prilega.

Pomembno: Naj bodo kabli zelo kratki, vsak milimeter šteje! Vse napeljave od palet do kombinatorjev morajo biti simetrične (koaksialni kabel enake dolžine).