What Software Do I Use CyberNanoFM+ 125W (DSP+RDS)

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
IKHNetworks
New registered user
New registered user
Posts: 4
Joined: Mon Jun 15, 2020 3:24 pm

What Software Do I Use CyberNanoFM+ 125W (DSP+RDS)

Post by IKHNetworks »

1 x Mains power supply for 100-125W
1 x Ethernet control + Barix IP audio + MP3 playout
1 x CyberNanoFM+ 125W (DSP+RDS)
1 x GP antenna mounting aid
1 x PCS GP 87-108 (1000W)

(What Software Do I use) You have multipel softwares that all do the same thing - I've installed every software so far and can't seem to find which one actually works with my transmitter? Above is my actual setup as ordered from PCS-Electronics
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

This is where the software is:

https://www.pcs.si/phpBB2/ ... php?t=2813
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply