Universal digital TV transmitter

 0,00 3.599,00

In stock

In stock


In stock


In stock


In stock


In stock


In stock


In stock

 3,99 7,49
 3,99 149,99

In stock

 1,99 1.999,99

In stock

Prices shown are without VAT (paid only in EU)


DIGITAL TV EXCITERS and AMPLIFIERS (scroll down for amplifier specs)

Digital TV is finally becoming affordable. We are now selling combinations of exciter + amplifier which can be used to form a small digital TV station. An exciter is universal and supports all digital standards. Please note that you need to purchase both exciter and amplifier.

– Full HD 1080p
– Digital Terrestrial TV (VHF & UHF supported)
– Frequency range: 460-862 MHz (UHF) and VHF
– Output level: 85 dBV (adjustable)
– Selectable Video/Audio PID
– Editable Channel name
– 16QAM and 64QAM
– DVB-T and other standards available (selectable via colour LCD display)
– High frequency stability
– Friendly programming
– Low power consumption
– Two models available, low cost with HDMI input only and more expensive model with HDMI + regular SVHS or component CVBS inputs

Technical specification for exciter:
– signal type video: CVBS, S-VHS or HDMI depending on model
– signal type audio: Stereo
– level Vpp audio: 0.4 – 4.8
– level Vpp video: 0.5 – 2
– costellations 16QAM / 64 QAM
– impedance Ω 75

– resolution Full HD 1080p

– audio decoding MPEG 1 LAYER II

Output section (only DVB-T described, note all standards are available):

– DVB-T standard ETSI EN 300 744 V1.5.1
– Carriers 2K
– Guard intervals 1/4, 1/8, 1/16, 1/32
– Code rate 1/2, 2/3, 3/4, 5/6, 7/8
– Frequencies MHz 47 – 862
– Bandwidths MHz 7-8
– Average output power dBµV 85
– Level adjustment dB 15
– MER dB 30
– Frequency pitch Hz 1000
– Impedance Ω 75

– inputs VIDEO (RCA or S-VHS) / AUDIO (2 x RCA)
– outputs F-type female


– consumption W < 16W
– operating temperature °C 0 ~ +45
– dimensions 1H rack, 16cm deep
– weight 3/5Kg volumetric


Designed for very low power digital exciters, this UHF amplifier offers very high gain in a compact, well ventilated, RF isolated and practical aluminum enclosure with integrated mains power supply and control circuitry. All this at a reasonable price. Finally a solution for digital TV that will not break your bank. This UHF amplifier uses super-linear NXP fets for distortion-free digital signal.
This module is also ideal for bringing the exciter power high enough to drive stronger digital TV UHF amplifiers.

Technical specifications:
– Mains power: 110-240V (50/60Hz) universal input, mains cable not included (same as used for PC)
– Frequency band: 470-850 MHz
– 66dB gain max. Automatically adapts to exciter level.
– BLF881 50volt LDMOS Technology.
– Input/Output 50 ohms, N female connectors
– Pout: 50W max / 250W max
– Weight: 10Kg

– Accepts signal from exciter and adapts gain automatically to prevent overdrive
– Excellent performance at low cost
– Stable well shielded design, required for such high gain
– Compete plug-in solution with integrated mains power supply
– Simple to use, just ON/OFF button
– LCD display, adjustable output power

– it is recommended that you also specify frequency so that we can set power meter to show correctly at the chosen frequency.
– band pass filter/cavity filter not included (recommended)

– Due to the high gain of this amplifier some shielding between exciter and antenna is required. WPlease ensure your antenna is well away from the amplifier and the exciter. This means at least 5 meters, preferably on the roof many meters above your work area.
– Excessive drive level can damage this amplifier; it was designed to work with low level exciters
– You can order coaxial cable for the antenna here and here:


Additional information


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.