Barix audio over IP/WLAN packages (digital STL links)

 469,99 999,99

In stock
 469,99

In stock

 999,99

In stock

 599,99

In stock

 644,99

In stock

Prices shown are without VAT (paid only in EU)

Description

The solution offered here is a audio over IP system for STL’s, back ups and remotes that gets your audio from studio to transmitter site easily over Ethernet, WLAN networks or the internet. We have put together packages including Barix audio streaming receiver and transmitter and also packages including wireless WLAN links. You can check the specs below.

INSTREAMER
The Instreamer encodes analog audio sources in real time in a configurable format (MP3, PCM, G.711,G.722) and streams via TCP, UDP, Shoutcast, Multicast RTP format to configurable destinations. Used in high quality broadcast applications, surveillance and VoIP markets alike, the Instreamer has proven its simplicity where Audio over IP encoding is required.

APPLICATIONS
– Live IP Audio Encoder for Streaming Applications
– Source Encoder for IP Audio Distribution Applications
– Background Music and Music-on-Hold encoder for VoIP Applications
– Shoutcast/Icecast Source Encoder
– Low latency IP Audio Encoder for multichannel applications
– Confidence Monitoring and Vox Switch for Broadcast Applications

FEATURES
– G.711, G.722, PCM linear Encoding
– MP3 Encoding (low Latency)
– Shoutcast/Icecast Source capability
– Audio Level Supervision with SNMP Trap generation
– IP Streaming via TCP, UDP, RTP, Multicast
– Line Level Input (Stereo)
– RS-232 Serial Port
– Power Supply (micro USB)

EXSTREAMER 20x
The Exstreamer 20x devices decode IP Audio streams and play out the received Audio signal via a built-in amplifier to 8 Ohm speakers. Supporting a large number of protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio as well as VoIP applications. With a local analog input, the Exstreamer 205 can also be used as an IP controlled, high quality amplifier.

APPLICATIONS
– Instore Audio Player
– Multiroom IP Audio System Receiver
– Internet Radio Receiver
– Generic VoIP decoder for IP Paging and Announcement applications
– Commercial Audio Streaming Applications
– SIP and IP Paging Zone Device
– Digital Annunciator, Message Player, Message Repeater

FEATURES
– G.711, uLaw, aLaw, PCM Encoding
– AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
– IP Streaming via TCP, UDP, RTP, Multicast
– Amplified Output 2x25W (8 Ohm)
– RS-232 Serial Port
– Power Supply (24V, included)
– MicroSD or USB Flash Interface
– IR Interface


EXTREAMER 500 WITH XLR CABLES
Professional Multiprotocol IP Audio de-/encoder with I/O, balanced audio. Support of Internet Radio and VoIP (SIP, RTP) codecs and protocols make the products the ideal choice for broadcast, professional and VoIP applications.

APPLICATIONS
– Live IP Audio Encoder for Streaming Applications
– Generic, bidirectional full-duplex VoIP module for Paging and Intercom Applications
– Paging and Audio Distribution with Amplifier control and monitoring
– Shoutcast/Icecast Source Encoder
– Confidence Monitoring and Vox Switch for Broadcast Applications
– Commercial Audio Streaming Applications
– Multiroom IP Audio System Receiver
– Low latency IP Audio Encoder for multichannel applications
– Background Music and Music-on-Hold encoder for VoIP Applications
– Source Encoder for IP Audio Distribution Applications
– Digital Annunciator, Message Player, Message Repeater
– SIP and IP Paging Zone Device

FEATURES
– MP3, G.711, PCM Encoding
– MP3, G.711, PCM, AACplus*, Ogg Vorbis* Decoding
– Shoutcast/Icecast Source capability
– Audio Level Supervision with SNMP Trap generation
– IP Streaming via TCP, UDP, RTP, Multicast
– Balanced Line Level Input (Stereo)
– Balanced Line Level Output (Stereo)
– Relay Output (4)
– Contact Closure Input (4)
– RS-232 / RS-485 Serial Port
– USB Flash Memory Interface
– Supply Voltage 24…48 VDC

Designed in Switzerland and installed in thousands of locations, the Barix Instreamer and Extreamer are the devices of choice for Broadcasters, Telco Providers, Entertainment venues and Surveillance projects alike.

 

What if I need professional XLR connectors at the encoder and decoder?
Than go for Extreamer 500 series. This solution gives you encoder and decoder with more options, better sound quality and XLR input/output connectors. The photo is symbolic, actually pro encoders are about 2x wider than the budget version. The same unit can be used as a transmitter or receiver so you need two of these.

How do I use these audio IP encoders/decoders?
If you have internet available at the studio and at the transmitter site  just purchase the “Audio over IP STL link” or the pro variant with XLR connectors. It includes IP audio encoder and decoder (2 devices) with mains power supply. You will be able to configure these at each of the sites so you can send audio from studio to any remote location.

Is there MP3 playback from USB?
A number of different firmware options exist, one of them is specially suited for STL configurations and has MP3 backup from USB.

Barix units have RS232. Can I use this to control my transmitter?
Yes, you can use Barix Instreamer/extreamer to remotely control your CyberMaxFM+ transmitter via Internet.

Wireless bridge 2Km (50km with grid antennas)
With a Transmit range of up to 2Km(built-in antenna) or 50Km (with grid antenna), a couple of these units will allow flexibility with your STL in a point to point configuration. This is an integrated solution for building wireless bridges operating in 2.4GHz band. One of these units is installed at the studio, the other at the transmitter site. There needs to be optical visibility. The units casing is made of UV resistant plastic and is resistant to even the most severe weather conditions. The device features built-in surge protection.

The wireless bridge operates in Router or Bridge mode, it can also serve as WISP (wireless internet service provider) so you can provide internet to the area.

WIRELESS BRIDGE SPECIFICATIONS:
– Output power: 27dBm
– Antenna: 12dBi
– Frequency Band: 2.4GHz , 802.11 b/g
– CPU: 180MHz
– Memory: 16MB DDR
– External antenna connector: RP-SMA
– Power: 12V or PoE (Power over Ethernet injector included)
– Physical Interface:
– One 10/100 Fast Ethernet RJ-45 (POE)
– Temperature Range: Operation -30°C to 75°C (humidity 5-95%)
– Dimensions:  265×120×83 mm
– Weight: 1100g

 

We will match any price out there.
 

Did you find this product cheaper somewhere else? Contact us, we will do our best to match and beat the price of competitor.

Skype: pcs_electronics,
you can also click Live Support in the header of the page or you can e-mail us directly to the email shown below:
Email shown as jpg to prevent spam

 

 

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.