Sale!

RigExpert AA-55 ZOOM antenna analyzer (ID: 72052)

 1,99 379,99

In Stock

Please choose components below to add to the cart.

SKU: RigExpert AA-55 ZOOM Categories: , , ,
Original price was: € 349,99.Current price is: € 199,99.

In stock

Original price was: € 369,99.Current price is: € 229,99.

In stock

Original price was: € 189,99.Current price is: € 164,99.

In stock

 49,99

In stock

 2,99 109,99

In stock

 5,99 108,00
Original price was: € 409,99.Current price is: € 379,99.

In stock

Prices shown are without VAT (paid only in EU)

Description

RigExpert AA-55 ZOOM

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

A built-in ZOOM capability makes graphical measurements especially effective.

The following tasks are easily accomplished by using this analyzer:

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable testing and fault location, measuring cable loss and characteristic impedance
  • Measuring capacitance or inductance of reactive loads

Warranty coverage by the RigExpertCare™

sticker_recare

 

RigExpert AA-55 ZOOM. Specifications.

 

Frequency range: 0.06 to 55 MHz

Frequency entry: 1 kHz resolution

Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems

SWR measurement range: 1 to 100 in numerical modes,
1 to 10 in chart modes

SWR display: numerical or analog indicator

R and X range: 0…10000, -10000…10000 in numerical modes,
0…1000, -1000…1000 in chart modes

Display modes:
–    SWR at single or multiple frequencies
–    SWR, return loss, R, X, Z, L, C and phase angle at single frequency
–    SWR chart, 100 points
–    R, X chart, 100 points
–    Smith chart, 100 points
–    Return loss chart, 100 points
–    Cable tools (loss and characteristic impedance)

Optional open-short-load calibration.

Non Volatile memory:
– 10 slots to save measurement results

RF output:
–    Connector type: UHF (SO-239)
–    Output signal shape: square, 0.06 to 55 MHz
–    Output power: +13 dBm (at 50 Ohm load)

Power:
–    Two 1.5V alkaline batteries, type AA
–    Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface:
–    320×240 color TFT display
–    6×3 keys on the water-proof keypad
–    Multilingual menus and help screens
–    USB connection to a personal computer

 

Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

Operating temperature: 0…40 °C (32…104 °F)

Weight: 310 g (10.9 Oz) w/o batteries

Warranty: 2 years

GTIN-13: 4820185420099

RigExpert AA-55 ZOOM is made in Ukraine.

Specifications are subject to change without notice.

RigExpert AA-55 ZOOM – How it works?

Structure diagram

The structure diagram of RigExpert AA-55 ZOOM is located below:

The “brain” of the analyzer is STM 32-bit RISC microcontroller. It controls a AD9958 DDS chip running at 500 MHz and generating two sinusoidal signals. Both signals are low-pass filtered and then put through pulse shapers, producing two square signals with LVDS levels. Resistive brigde was chosen to measure parameters of a load because of its simplicity and good frequency response. The switch commutates two outputs of the bridge. After the switch, the signal is mixed with the second channel output to produce audio frequency of 1.5 kHz.This signal is then filtered and fed through the 16-bit ADC to the microcontroller. The 290×220 color TFT display and the 6×3 keys keypad are connected directly to the CPU. The analyzer is equipped with 4 Mbytes of external Flash memory to store measurement results. The USB interface chip allows connecting the analyzer to the PC.

Close look at the bridge

This is a diagram of the resistive bridge and its connection to the mixer:

The switch which is controlled by the CPU feeds the signal from the certain side of the bridge to the mixer chip. When the load is totally active and its resistance is 50 Ω, the bridge is balanced and the switch outputs the same signal in both positions. This eliminates the need of calibration of the analyzer, also giving very good precision near SWR=1.

RigExpert AA-230 ZOOM – In the package

  • RigExpert AA-55 ZOOM
  • USB cable
  • Soft case
  • User’s manual
  • Alkaline batteries
dsc08331
  • RigExpert AA-55 ZOOM. Downloads.

    AntScope2 for Windows & MacOS:

    • Click for downloading the latest version of the Antscope2 for your Windows PC.
    • Click for downloading the latest version of the Antscope2 for your MacOS.

    Flash Tool for Mac or Windows:

    • Please download and run the Firmware update tool for Windows.
    • Please download and run the Firmware update tool for MacOS.

    User’s & Software Manuals:

    Product brief

 

We believe we have the Best prices on these units. If you can find a better price for RigExpert antenna analyzer somewhere please let us know, we will do our best to beat their price. You can order by scrolling to the bottom of this page, if you are a EU based customer please note VAT is not included. VAT registered EU companies do not pay VAT (contact us with your VAT ID code).

We are official distributor for RigExpert and also run full service center. We provide servicing/repairs for all RigExpert products! Contact us for a quote.


What is included with Rigexpert AA-35 ZOOM and AA-55 ZOOM:
– Analyzer
– English user & software manual
– Drivers and software are available online
– Soft case

Does AA-55 ZOOM have BlueTooth or not?
Rigexpert used to put BlueTooth inside AA-55 ZOOM units but the modules inside became obsolete during the post-Covid semiconductor shortages. So RigExpert stopped installing BlueTooth inside AA-55 ZOOM. It is not possible to buy any new units with BlueTooth from RigExpert. However we were able to obtain BlueTooth modules and we are now shipping BlueTooth models exclusively. If you need BlueTooth you can still buy models with BlueTooth from PCS Electronics.

Are you selling Smith or Polar chart version?
– All our RigExpert analyzers are non-US version (they have ability to display Smith Chart). You can download US firmware from RigExpert.com. Changing firmware does not void warranty.

Building amplifiers, transmitters, filters or other RF equipment? You will also need these:

RF high power capacitors
RF HIGH POWER
capacitors
Special coax for amplifiers
10, 12, 17, 25,
50 ohm PTFE
coax
RF high power capacitors
Metal clad
capacitors
RF high power resistors
High power
RF resistors
Attenuators
Attenuators
100W PLANAR FM PALLET AMPLIFIER (12-15V)

FM pallet amplifiers

Power supply
Mains power supply
Fans
High power fans
Power supply
40V to 65V programmable mains power supply
Atenna analyzer
Antenna analyzers
Trimmer capacitors
Trimmer capacitors
100W PLANAR FM PALLET AMPLIFIER (12-15V)

HAM pallet amplifiers

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.