1900W High Power FM Planar Pallet amplifier

 1,99 759,99

In Stock
SKU: 1900W / 50V Category:
Original price was: € 869,99.Current price is: € 759,99.

In stock


In stock


In stock

 39,99 229,99
 2,49 129,99

In stock

Original price was: € 159,99.Current price is: € 154,49.

In stock

 1,99 2.999,99

In stock

Prices shown are without VAT (paid only in EU)


The new Ampleon BLF188XR makes it possible to create highly rugged 1000W (2000W pulsed when two are used) pallets for high VSWR industrial and broadcast (analog and digital) applications.

Device: 2x Ampleon BLF188XR
Approx > 75% efficiency @ 88-108Mhz CW
Up to 1900W at 50V

Recommended voltage supply: 50V DC
Supply current: 50A
Operating Temperature range: 0 to +70 °C ( at Device Flange )
Storage Temperature range: -30 to +90 °C
Load Mismatch: 65:1 (all phase angle)
Ensure sufficient strong airflow across the top of the pallet, the PCB can get very hot at max power

Frequency Range: 87.5 to 108 Mhz
Power Gain: 26dB typ. ±1dB
Power Output: 1800W typ. @ 50V
Power Input: 4-7W typ.
Efficiency: 75% max. @ 108Mhz FM CW.
Supply Voltage: 30-50V
Size (LxWxH): 255x100x30mm
F2 Second Harmonic: -35dB typ.
F3 Third Harmonic: -35dB typ.

You can find special 50V power supply for this amplifier here!

– Ensure shielding between final stage and audio stage with exciter. Install a good feed-through capacitor on the supply +48V wiring feeding the power output stage. This will keep and RF from the power line.
– Excessive drive level can damage this amplifier; design of equipment where the amplifier will be mounted must foresee an appropriate protection circuits.
– Amplifier efficiency is function of supply voltage, in order to obtain max efficiency please reduce supply in function of desired output power. Generally best compromise between efficiency and harmonic emission, is obtained when the amplifier work at about 2-3 dB of gain compression.
– RF pallets are sensitive devices, if you do not have sufficient experience please consider a fully finished product instead. They can be burned by applying too much drive power, too high supply voltage, not using proper heatsink, using filter with unsufficient specifications, connecting mismatched loads or no load at all and also by soldering coax with too long leads. For this reason there is no warranty for any pallet. We do assure you that every pallet is tested and is 100% operational as it leaves our workshop.

Quantity discount is available and shipping becomes a lot cheaper per unit as quantity goes up. For additional info and prices please ask for a quote here.

NOTE: The pallet amplifier is shipped without the connectors shown on the photo and final design was altered somewhat (photo coming soon).

Additional information


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.