1100W ART1K6 FM band 55V pallet

 1,99 339,99

In stock
Original price was: € 399,99.Current price is: € 339,99.

In stock


In stock


In stock


In stock


In stock

 39,99 159,99

In stock

Original price was: € 159,99.Current price is: € 154,49.

In stock

 1,99 2.999,99

In stock

Prices shown are without VAT (paid only in EU)


FM wideband amplifier with original AMPLEON transistors (ART1K6 version)

Designed for FM radio transmitters, this amplifier uses a single AMPLEON LDMOS push-pull transistor to produce 1000 to >1200 watts! An excellent heatsink with strong technical background in RF amplifiers is required.  Model PCS LPF 1500W, PCS LPF7000 or better are the only qualified low pass filter for this product. System integrators who plan to provide their own low pass filters must take great care to minimize any reflection in the filter. Quantity discount is available! Detailed PDF manual available on request.

Technical specifications:
– Shipping Weight: 0.9Kg
– 86-110MHz 43-55V @ 22.5-29A
– Input/Output 50 ohms
– Pout 1050-1150W with 2-3W input
– 23-26 dB gain
– Class B push-pull.
– Temperature compensated bias designed by NXP.
– Compact size; LxWxH 4.0 x 2.25 x 1.5 inches
– Standard 1/4 inch copper base
– Bias disable pads facilitate integration into amplifier systems that employ automatic VSWR protection.


– Due to the High gain of this pallet, a good shielding between final stage and any driver/low power stage is required. Please foresee a good RF choke also on the supply wiring.
– Excessive drive level can damage this amplifier, design of equipment where the amplifier will be mounted, must foresee an appropriate protection circuits. Max input level is + 6dB referred to the typical input power.
– Amplifier efficiency is function of supply voltage, in order to obtain max efficiency please reduce supply in function of desired output power. Generally best compromise between efficiency and harmonic emission, is obtained when the amplifier work at about 2-3 dB of gain compression.
RF pallets are sensitive devices, if you do not have sufficient experience please consider a finished product instead. They can be burned by applying too much drive power, too high supply voltage, not using proper heatsink, using filter with unsufficient specifications, connecting mismatched loads or no load at all and also by soldering coax with too long leads. For this reason there is no warranty for any pallet. We do assure you that every pallet is tested and is 100% operational as it leaves our workshop.

Additional information


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.