1/2″ corrugated coaxial cable with connectors

Description

Technical specifications for 1/2 inch helical corrugated coaxial cable:
Structure:
– Impedance: 50 ohms
– Inner conductor: Copper wire 4.9mm
– Dielectric: Low Loss foam polyethylene 11.6mm
– Outer conductor: Corrugated copper tube 13.7mm
– Jacket: Polyethylene, black 16mm

Mechanical properties:
– Weight: 0.35Kg/m
– Minimum bending radius, single bending: 70mm
– Minimum bending radius, repeated bending: 200mm
– Max tensile force: 1470N
– Recommended temp. range: -40C to +60C
– Recommended temp. range during installation: -25C to +60C

Electrical properties:
– Charasteristic impedance: 50 +-1 ohms
– Velocity factor: 88%
– Capacity: 76pF/m
– Max operating frequency: 3000MHz
– Cut-off frequency: 10200 MHz
– Peak power rating: 25.6KW
– Peak RF voltage rating: 1.6KV
– DC-resistance inner conductor: 0.97ohm/Km
– DC-resistance outer conductor: 1.9ohm/Km

Attenuation:
– 10MHz: 0.67 db/100m
– 30MHz: 1.17 db/100m
– 88MHz: 2.02 db/100m
– 100MHz: 2.16 db/100m
– 108MHz: 2.25 db/100m
– 200MHz: 3.08 db/100m
– 900MHz: 6.8 db/100m
– 1500MHz: 9.0 db/100m
– 2300MHz: 11.4 db/100m
– 3000MHz: 13.2 db/100m

Power handling (1/2inch helical corrugated coaxial cable):
– 30MHz: 7.27KW
– 88MHz: 4.2KW
– 108MHz: 3.94KW
– 150MHz: 3.2KW
– 450MHz: 1.8KW
– 1250MHz: 1.05KW

For better power handling ability or less loss please use 7/8 inch or thicker CellFlex models.

If you need this cable in different length or with different connectors please contact us.