PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Slovensko    
  Na vrh » Katalog » Stereo koderji » Moj račun  |  Vsebina vozička  |  Na blagajno   
Naši izdelki
FM oddajniki->
AM oddajniki
DAB+ digitalni radio->
Razprodaje
Material za oddajnike->
FM ojačevalniki->
FM radijske antene
TV oddajniki->
PC oddajniki
TV antene
TV ojačevalci->
Brezžične avdio/video povez
Koaksijalni kabel in konektorji
RDS koderji
Stereo koderji
Inštrumenti
Elektronske komponente
Programska oprema
Zanimivosti->
Sončni paneli
Oprema za studio->
DEVA Broadcast->
RF servis in razvoj
Kaj je novega?
Extra STL receiver with PSU
Extra STL receiver with PSU
599.99US$
Naši radijski vodiči
Kako začeti
Pogosto zastavljena vprašanja
Kako narediti oddajnik
Koaksialni kabel
Avdio oprema
Sheme
Nove sheme
Čarovniki
Ojačevalci
Antena
Napajalnik
Priporočeno branje
Spajkanje
Pričevanja kupcev
Informacije
O podjetju PCS Elektronik d.o.o.
Pošiljanje in vračilo izdelkov
Naročanje
Podpora
Trenutne zaloge
Pogosto zastavljena vprašanja
Forum
Kontaktirajte nas
Distributerji
Izjava o varnosti in zasebnosti
Program oglaševalcev
Informacije o oglaševanju
FAQ programa oglaševalcev
Prijava oglaševalcev
Kuponi
FAQ za darilne kupone
Informacije o varnosti


PayPal and credit cards accepted!
SE8000 DSP+ stereo encoder with 114x oversampling  


New stereo encoder series with impressive 114x oversampling

SE8000 series stereo encoders feature a number of big enhancements and raise the bar considerably for stereo separation and audio excellence. The amazing sonic purity and clarity are sure to impress you. The new MPX multiplexer circuit is 114x oversampled and gives better stereo separation than anything else in its price range. Additional digital audio input completely eliminates any ground-loop problems. The new SE8000 series stereo encoder is an improved SE5000 DSP+ design.

You can find the manual for this (and other products) here.

How are SE8000 DSP+ better than SE5000 DSP+
- Much better stereo separation due to 114x oversampling
- On-board XLR connectors
- On-board USB audio interface
- Edge-mounted on-board MPX level trimmer, accesible from the outside
- Additional low pass filters and limiters
- On-board RF/LC filter and ESD protection
- Easy interfacing with new IO board and RDS (via flat cable)
- Integrated IO board also supports Ethernet now (requires Ethernet module)
- MAXLINK II support for no-soldering interfacing with MAXPRO8015

Can I replace my old SE5000 DSP+ with this new stereo encoder?
Yes, but the MONO and STEREO setting will be reversed. Also the size of the board has changed. But old LCD display software will work with the new SE8000. Also RDSMINI4000 will work in SE8000 DSP+.

Technical specifications:
- Audio Response: 10Hz-15KHz, DSP or LC filtered (as per CCIR standards)
- DSP: 24-bit Digital Signal Processor, Analog: LC filters
- 19KHz notch filter, >-60 dB typ
- Precise pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, balanced or unbalanced
- Audio Input Level: 0 dB
- Distortion: <0.1%
- S/N ratio: >90 dB
- Separation: >60 dB typ. (much more than typical radio receivers can resolve)
- Pilot Frequency: 19 KHz, 114x oversampled MPX
- Output Impedance: 75 Ohms
- Power Requirements: 12-15VDC / 200mA
- PC Board Size: 100x120mm
- Audio connectors: all RCA jacks are mounted on the board, 3-pin jumpers for XLR balanced inputs, optional MCX or solder pads for MPX output
- Power connector: solder pads
- Output level: Ueff 1-4V adjustable with trimmer

What is the RDSMAX8000+ micro board?
This is a plug-in upgrade board for SE8000. It is simply plugged into it. Once connected the SE8000+ supports RDS (Radio Data System) functionality. This board also require IO board which makes it possible to program RDS with a computer via USB or RS232. Same IO board connects both to LCD and to RDS board.

What is the IO board (USB+RS232+3xBNC) with 2x 20cm 6-pin flat cable and why do I need it?
IO board is required, if you want to control SE8000DSP+ and RDS board remotely via RS232 or USB. It plugs into the LCD control module. RS232/USB cable is not included. It also serves to connect three BNC connectors to SE8000.

What is the predrilled LCD front panel?
- This is a rectangular piece of aluminum with predrilled holes for LCD display, button and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the encoder into a nice looking case (eliminates the hard work with the LCD). This is of course an optional item. There are two models, one for small 2x16 LCD and the other for large 4x16 LCD.

What is the predrilled SE8000DSP+ back plate?
- This is a rectangular piece of aluminum with predrilled holes for XLR connectors, RCA connectors, IO board (3xBNC and USB, RS232). It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the encoder into a nice looking case (eliminates the hard work with the holes positioned exactly where the connectors are). This is of course an optional item.

 

 



Ta izdelek smo dodali na spletno stran Tor 26 Junij, 2018.
 *Izberite količino za vsak izdelek, ki ga želite, in kliknite gumb 'Dodaj v voziček' spodaj.
Prikazujem 1 do 8 (od 8 izdelkov) Strani rezultatov:  1 
    Ime   Model   Izberi   Cena 
SE8000DSP+ series stereo encoder  SE8000DSP+ series stereo encoder     119.99EUR
DDV se doda na koncu
Blue 2x16 LCD display w rotary button  Blue 2x16 LCD display w rotary button   SE8000DSP+  34.99EUR
DDV se doda na koncu
Big blue 4x16 LCD display w rotary button  Big blue 4x16 LCD display w rotary button   SE8000DSP+  39.99EUR
DDV se doda na koncu
Pre-drilled LCD panel (rotary button 4x16)  Pre-drilled LCD panel (rotary button 4x16)     5.99EUR
DDV se doda na koncu
Pre-drilled LCD panel (rotary button 2x16)  Pre-drilled LCD panel (rotary button 2x16)     5.49EUR
DDV se doda na koncu
Pre-drilled SE8000DSP+ back pannel  Pre-drilled SE8000DSP+ back pannel     6.99EUR
DDV se doda na koncu
RDSMAX8000 micro RDS encoder  RDSMAX8000 micro RDS encoder     69.99EUR
DDV se doda na koncu
IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable  IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable   2x flat cable  44.99EUR
DDV se doda na koncu
Prikazujem 1 do 8 (od 8 izdelkov) Strani rezultatov:  1 
Nakupovalni voziček
0 izdelkov
Hitro iskanje
 

Za iskanje uporabite ključne besede.
Obvestila
Obiščite naš forum
Zadnje objave:

Kliknite za prikaz foruma
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce Slovensko
Valute
   

Druge valute

Kontaktirajte nas | O podjetju PCS Elektronik d.o.o. | Podpora | Pogosto zastavljena vprašanja | Kako začeti | Pošiljanje in vračilo izdelkov
Prikaži cene v US$ | Prikaži cene v EUR | Priročniki, programska oprema in podpora

Vse besedilo na tej spletni strani, opisi izdelkov, vodiči in skripte so
last podjetja PCS Elektronik d.o.o.
osCommerce