Ok.. i have a working x mitter !........some questions: plz

Discuss antenna construction, problems, tuning, designs...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
dutchviggen
New registered user
New registered user
Posts: 2
Joined: Fri Jan 30, 2004 11:57 pm

Ok.. i have a working x mitter !........some questions: plz

Post by dutchviggen »

Ok, i have a perfectly working x mitter now.

need a antenna: the half wave dipole is ideaal
but what i don´t get.....
should i run the inner cor of the coax to 1 or 2 radials?!?!!

or is it cor to 1 radial; outer to the other radial.

i ´m studying al scheme´s but i doesn´t clear the sky for me.


other question
sound solution. the compressor limiter software for good old winamp,

which options / parts do i switch on. and/or tune which values have you got?!!!!! (screenshot)

thnx indeed

:-?
viggen
Sir Nigel
Moderator
Moderator
Posts: 334
Joined: Fri Nov 28, 2003 5:07 am
Location: us.gif
Contact:

Post by Sir Nigel »

I think the outer wire is just an insulator to prevent interference from other rf equipment. As far as sound solution, the presets on it should work fine. Otherwise you could use this really great software MBL4 v6:

http://www.pcs-electronics.com/en/produ ... b=software
-empty-
dutchviggen
New registered user
New registered user
Posts: 2
Joined: Fri Jan 30, 2004 11:57 pm

Post by dutchviggen »

Huh?! no, i refer to this image:

Image

if you look very carefully.... you see that there is a difference between the lines running to the arerials.

one is thick....outer connector i suppose.
one is thin.... inner core

than another questions rises.

where does that balun has to be fitted on.
ik know that a BALUN only works if you use the outer connector.

but where do i fit the beginning of the BALUN and where do i fit the end?!

(the end ot the core??)

plz advice
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Balun is not required for the RPL0205.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply