Hello everyone !
I would like to use the MAX PRO II for a particular application i.e.
I have to TX a tone to a receiver tuned anywhere in the FM 86 to 108 MHz
band. A sort of wide band TX. This is normally not wanted, but in my case it is just what I need. Can anyone suggest what to modify on the MAX to
achieve this result?Regards
Mark43
Wide band MAX PRO II
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
What you want is not possible.
It is possible to generate a strong 10.7MHz signal, which would
be heard on most radios. But it might be heard on radios used
by police, fire department... You will quickly find yourself behind
bars with a hefty fine.
It is possible to generate a strong 10.7MHz signal, which would
be heard on most radios. But it might be heard on radios used
by police, fire department... You will quickly find yourself behind
bars with a hefty fine.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128