A question for you! I'm thinking of buying your RDS coder to work in my existing transmitter. I see though that it works with 75 Ohms from the stereo coder/exciter and into the Amp.
My existing transmitter is 50 Ohm exciter output / amp input.
Will it work OK? Can the RDS or my exciter / Amp be easily adjusted.
Thanks
Phil (Manchester UK)
Using RDS in my existing transmitter
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
RDS encoder is inserted into the audio chain, not between the
antenna and transmitter.
It will work, but only if you connect it properly.
antenna and transmitter.
It will work, but only if you connect it properly.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128