Just got my new CYBER MAX LCD. I have been using the PC ISA for the past 2 years. I wanted a little more power and I wanted to free up my pc.
My problem is a nasty background hum which I did not have with the PC version. It is not the audio source, I have eliminated that.....
I bought this unit because of it having a power supply which I thought would be cleaner power.
What can you suggest to eliminate this hum.
Thanks.
NEW CYBER MAX LCD BACKGROUND HUM
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Antenna problems and ground loop problems.
You need to move antenna away from the transmitter, make
sure SWR is ok (that it is tuned). Experiment with cables a little,
try to move them around until HUM dissapears.
How is your audio equipment? Does the hum dissapear when
you discounnect audio cables? Are you using a PC? Sometimes
these are not grounded well or they are in another branch of
the mains wiring. Experiment a bit.
You need to move antenna away from the transmitter, make
sure SWR is ok (that it is tuned). Experiment with cables a little,
try to move them around until HUM dissapears.
How is your audio equipment? Does the hum dissapear when
you discounnect audio cables? Are you using a PC? Sometimes
these are not grounded well or they are in another branch of
the mains wiring. Experiment a bit.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128