Xbox LED ring mod

This is the place where you can ask questions
related to schematics posted on our website
and request new schematics. We will try to post whatever is possible.

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
Gotrek
New registered user
New registered user
Posts: 1
Joined: Tue Nov 25, 2003 2:17 pm

Xbox LED ring mod

Post by Gotrek »

Can someone look at the following circuit and let me know if it should work, basicly it's a mod for my Xbox, I'll have two LEd rings one green one red, the mod should make it be lit up green at all times but flash red when there is disk activity. I didn't come up with the design just copied it :) I just want to make sure it will work before I build it. Ask me any questions and I'll answer the best I can.
I was wondering if On output pins o0, o2, 03, 05, 07 should be connected to the 12V source or even bridged to each other like on the input side

See attachment below

http://www.geocities.com/ddduval/XBOX.gif

Note: (you must copy and paste this line in your browsers adress line to see this)
Post Reply