maxpro2015+ v3 and se6000 questions

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
tazrtoon
New registered user
New registered user
Posts: 1
Joined: Thu Dec 08, 2016 7:27 pm

maxpro2015+ v3 and se6000 questions

Post by tazrtoon »

i have this two boards and i want to know the minimum psu needed for them to work(do they need separate input?)
when i connect them together with the ribbon and plug an AC adapter 12v~1A and connect it to the usb i see a sound card an a silicon CP210x controler but i can't seem to get it to work with CyberMaxFM v55

and where can i connect USB IO board + 20cm 6-pin flat cable on this
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

2,5A minimum is needed.

You just need to connect power to 2015.

You can connect USB IO into LCD display (RS232 port on LCD display).
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply