i have this two boards and i want to know the minimum psu needed for them to work(do they need separate input?)
when i connect them together with the ribbon and plug an AC adapter 12v~1A and connect it to the usb i see a sound card an a silicon CP210x controler but i can't seem to get it to work with CyberMaxFM v55
and where can i connect USB IO board + 20cm 6-pin flat cable on this
maxpro2015+ v3 and se6000 questions
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
2,5A minimum is needed.
You just need to connect power to 2015.
You can connect USB IO into LCD display (RS232 port on LCD display).
You just need to connect power to 2015.
You can connect USB IO into LCD display (RS232 port on LCD display).
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128