MAXPRO 5015+ Jumper Settings

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
BrentAllen
New registered user
New registered user
Posts: 16
Joined: Sat Feb 23, 2013 4:39 am

MAXPRO 5015+ Jumper Settings

Post by BrentAllen »

Hello PSC,

I have your CYBER MAX FM+ 300W with MAXPRO 5015+ inside. My question is what is the correct MAXPRO 5015+ jumper setting for this amp? I have 1,2,6,8. it is currently set at 6, would it be safe to try 8? The reason I'm asking is my amp with a perfect 1 to 1 SWR will only output 200Watts at 102.5 FM. The amp is running at 48volts so I don't think it is a voltage problem.
BrentAllen
New registered user
New registered user
Posts: 16
Joined: Sat Feb 23, 2013 4:39 am

Post by BrentAllen »

Sorry for the error it is 1,2,4,8 Mine is set at 4.
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

I've just emailed you, check your email.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply