How to test for Tilt Correction on the PCI MAX 3000+

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
User avatar
BriansBrain
New registered user
New registered user
Posts: 6
Joined: Wed Mar 06, 2013 6:24 pm
Location: Gran Canaria, Spain.

How to test for Tilt Correction on the PCI MAX 3000+

Post by BriansBrain »

Hello,

I am interested in getting a PCI MAX 3000+ 8)

I use Breakaway Broadcast as my sound processor :wink:

I want to use the PCI MAX's on-board sound card to have direct digital audio streaming with reduced noise.

But :roll:

How or where do I obtain an audio output to do the Tilt Correction test using 60hz Square Wave.
Instuctions here >>> http://www.claessonedwards.com/index.ph ... &Itemid=67

Image

I have Oscilloscopes, two of these actualy...

Image

I also have some qualifications in electronics engineering :lol:

Thanks in advance.

BB.......... 8)
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Do you see the LED diodes? On one side of both groups of LEDs you have full access to LEFT and RIGHT channel.

Or did you want access to MPX?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
User avatar
BriansBrain
New registered user
New registered user
Posts: 6
Joined: Wed Mar 06, 2013 6:24 pm
Location: Gran Canaria, Spain.

Post by BriansBrain »

pcs wrote:Do you see the LED diodes? On one side of both groups of LEDs you have full access to LEFT and RIGHT channel.
OK :wink:

Thanks for the info :D
Post Reply