PCI MAX 3000 and LCD/VU Display

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
berrall
Regular poster
Regular poster
Posts: 30
Joined: Thu Oct 14, 2010 1:49 am

PCI MAX 3000 and LCD/VU Display

Post by berrall »

I am interested in purchasing the display board for the PCI MAX 3000. I have the PCI MAX card mounted in a PCI slot on the motherboard and I would like to mount the display boards into one of the 5.25 inch drive bays.

I would need the connecting cable between the display board and PCI Max to be around 15 inches long. Are you able to provide the board with this length of cable?

Nick.
User avatar
5r
Moderator
Moderator
Posts: 62
Joined: Sat Jan 26, 2002 1:00 am
Location: Radio Land

Post by 5r »

what would be the purpose for this. if it is allready instaled in the pc, you have control over the card. if you turn off the pc you wont have power to power the card. so i really dont see the point of this.
regards,

Peter
PCS team
berrall
Regular poster
Regular poster
Posts: 30
Joined: Thu Oct 14, 2010 1:49 am

Post by berrall »

You are correct with what you say - But it would look good to have the freq and modulation display mounted in the front of the computer. No real need for it, just mainly for looks.
User avatar
5r
Moderator
Moderator
Posts: 62
Joined: Sat Jan 26, 2002 1:00 am
Location: Radio Land

Post by 5r »

well it could be done. contact me over email.
regards,

Peter
PCS team
berrall
Regular poster
Regular poster
Posts: 30
Joined: Thu Oct 14, 2010 1:49 am

Post by berrall »

Thanks.

What is your email address?

Cheers Nick.
Post Reply