CYBERMAXFM+ 15W FM transmitter

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
steve88
New registered user
New registered user
Posts: 4
Joined: Sun Jan 02, 2011 10:55 pm

CYBERMAXFM+ 15W FM transmitter

Post by steve88 »

HI, I'm considering buying the CYBERMAXFM+ 15W FM transmitter, I see on the page it says 12-15Watts typical, I plan to be running it at around 500 mw most of the time, but want the option to go up to 10 watts. Would that cause any problems with this transmitter running at at such a low output power? thanks again for your help, Steve
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Nope, it will run under minimal load happily.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
steve88
New registered user
New registered user
Posts: 4
Joined: Sun Jan 02, 2011 10:55 pm

CYBERMAXFM+ 15W FM transmitter

Post by steve88 »

Thank you, Also does the CYBERMAXFM+ 15W FM transmitter Model B (with the DSP stereo encoder) use your SE5000 DSP+ stereo encoder, or some other type of DSP encoder?
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

They use SE5000 DSP+.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply