Linux(opensource)
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Linux(opensource)
Greetings,
I am new to this forum and I have just purchased the PCI-MAX2007+.
I downloaded the source code for Linux users, but I get this error
when I run make:
rds.c:1: error: code model ‘kernel’ not supported in the 32 bit mode.
I am using SUSE 11.1 32bit.
Is there a config option that I need to run?
THKS
w3rn
I am new to this forum and I have just purchased the PCI-MAX2007+.
I downloaded the source code for Linux users, but I get this error
when I run make:
rds.c:1: error: code model ‘kernel’ not supported in the 32 bit mode.
I am using SUSE 11.1 32bit.
Is there a config option that I need to run?
THKS
w3rn
Nice to see you got it working. Be sure to get the latest revision from the new project location: http://pcimaxfm.googlecode.com/
PCI Max models newer than 2005 doesn't have a TX power toggle as far as I know (I think I asked Marko about this once). When not broadcasting set the power level to 0 and unplug any external power and audio signal.
PCI Max models newer than 2005 doesn't have a TX power toggle as far as I know (I think I asked Marko about this once). When not broadcasting set the power level to 0 and unplug any external power and audio signal.
Additionally, you can park the frequency to band edge or for example 87.000 MHz.
This way any tiny feed-through signal, even if in the order of micro watts, won't
make it to nearby receivers (1 meter or so) and won't be audible.
This way any tiny feed-through signal, even if in the order of micro watts, won't
make it to nearby receivers (1 meter or so) and won't be audible.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Unfortunately pre-emphasis is not controlled by software.
It is selected with solder-jumper on the board itself
and is preselected for you in the factory.
It is selected with solder-jumper on the board itself
and is preselected for you in the factory.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
-
- New registered user
- Posts: 1
- Joined: Thu Sep 24, 2009 1:29 am
pcimax 32bit linux driver
ok sorted the issue its to do with a cflag in the /src/common/Makefile.am delete this on the cflag line -mcmodel=kernel. and then you will be able to compile on 32bit linux. i have tried this on a stock debian 5 system and the driver fragged the kernel with of panics and traces. tried it on current stable ubunu and seems to work fine without fault. driver needs more work but does work on certail 2.6 kernels and voodoo magic:) many thanks
Great work on Linux, guys!
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128