Hello again. I can hear a continuous noise, about 15.000 hz on the radio when SE4 DSP encoder and Max pro4+ transmitter are connected. It is a low frequency wave and I am not sure if it comes from the encoder or it is generated by the transmitter.
One thing I have noticed is that if I put my finger on the near of capacitors c38, c39, c40 of the Max Pro4+ it seems to dissapear or is less audible.
Regards.
Max Pro IV+ 15Khz Background Noise
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators