PoScope Basic2 bundle

You can buy it here:
http://www.pcs-electronics.com/based-oscilloscope-poscope-basic-bundle-p-1046.html

Driver:
http://www.pcs-electronics.com/software/PoScope_basic.exe

Manual:
http://www.pcs-electronics.com/software/PoScopeUserManual.pdf

The PoScope Basic2 includes:

* 1 PoScope Basic2
* 2 PoProbe60
* 1 PoProbeL2
* 1 USB cable
* 1 CD with software and manual

Using the Plug and Play USB technology, the PoScope Basic2 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator, logic analyser, and spectrum analyser with advanced trigering all in one easy to use package.
PoScope Basic2 modes:

2-channels oscilloscope

* Sample rate: 100 Hz - 200 kHz
* Input voltage: -20 - +20 V
* ADC capacity: 10 bits
* Triggering: absolute, differential, external
* Window functions: Hamming, Hanning, Blackman, Blackman-Harris

2-channels spectrum analyzer

* Sample rate: 100 Hz - 200 kHz
* Input voltage: -20 - +20 V
* ADC capacity: 10 bits
* Triggering: absolute, differential, external
* Window functions: Hamming, Hanning, Blackman, Blackman-Harris

16-channels logic analyzer

* Sample rate: 1 KHz - 8 MHz
* Input voltage: 0 - 5V
* Triggering: edge, level, mask
* Decoding: UART, SPI, I2C and 1-Wire

2-channels recorder

* Marker measurements
* Option to add 99 markers with comments
* Maximum, minimum and average voltage measurement for each channel
* Waveform record within several tens of hours

5 channels square signal and PWM generator

* Frequency: 3,91 kHz – 1 Mhz
* Duty cycle: 1- 99% f=7,8125 kHz

8-channels pattern generator

* Sample rate: 1 KHz - 1 MHz
* Memory depth: 1544 bit/channel
* Output voltage: logic 0 = 0V, logic 1 = 3.3 V
* Maximum input/output current: 10 mA

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128