Hello
I have a RDS4000+ unit. RDS works fine, but I have no sound.
I have connected the composite output from an OMB COM LIM 3 unit to MPX IN.
Then, I have connected MPX OUT to the transmitter's MPX IN connector.
I have swapped the cables, just in case one of them is wrong, but the same happens.
Any idea?
Thank you.
No sound
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
At the underside of the RCA connectors there should be a bridge connecting the two pins together.
You can email me a photo and I will check for you.
You can also try to re-solder the RCA connector pins from the top layer (not bottom) as there
might be poor contact between top and bottom layer around RCA connectors.
Marko
You can email me a photo and I will check for you.
You can also try to re-solder the RCA connector pins from the top layer (not bottom) as there
might be poor contact between top and bottom layer around RCA connectors.
Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128