schematic from the AM MAX II transmitter

Discussions regarding our AM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
ronnieboy58
New registered user
New registered user
Posts: 4
Joined: Thu Jun 14, 2007 1:55 pm

schematic from the AM MAX II transmitter

Post by ronnieboy58 »

Is it possible that we can get the schematic of the AM max II board.
I am interesting how will work the PLL on the board and how it makes the freq.
ronald.
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Nope, sorry.

Let me spell this out again for you, it is NOT possible to change frequency band
just by changing some software parameters.

The driver, filters and output stage are different for various models.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
ronnieboy58
New registered user
New registered user
Posts: 4
Joined: Thu Jun 14, 2007 1:55 pm

Post by ronnieboy58 »

Ok,
that is clear for me,but the version AMMAXII HAM 40m-80m have the range between 3.6 and 7,1mhz.
Is it then not possible for my type transmitter with the range 6-7mhz to change it between 3.6 and 7.1mhz.
Is it possible too buy only the 89c2051 IC with this version software between the =D> 40m-80m =D> band?
greetings ronald.
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Its better to wait for AM MAX 3 and perhaps get that one :)

The price of such modification would exceed reasonable amount and would
probably buy you 50% of the new am max3 unit :)

Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
ronnieboy58
New registered user
New registered user
Posts: 4
Joined: Thu Jun 14, 2007 1:55 pm

Post by ronnieboy58 »

Any idee when this new AM MAX 3 version will come out then.
ronald.
Post Reply