reprogramming the 89c2051 for the AM DSP board

Discuss computer software and hardware with other users...(SW limiters, audio processors etc)

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
ronnieboy58
New registered user
New registered user
Posts: 4
Joined: Thu Jun 14, 2007 1:55 pm

reprogramming the 89c2051 for the AM DSP board

Post by ronnieboy58 »

Hello,
Is it possible to reprogramming the 89c2051 flash ic in the AM II DSP board for the shortwave band?
Now it is programming for the freq between 6 and 7 mhz, but i will use it in a bigger range for example 1,5mhz and 10 mhz.
Can somebody help me how i can do this?
ronald.
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Nope, hardware does not support other bands.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply