Confused with back led of pcimax 2006+

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
themaxx
New registered user
New registered user
Posts: 18
Joined: Tue Dec 21, 2004 10:25 pm

Confused with back led of pcimax 2006+

Post by themaxx »

Here is what i can not understand . I have a pcimax 2006+ w/rds and a 15w booster . the card is connected with the booster with the included cable (which has 2 male satellite plugs ). Now the setup works fine (i have very good sound very low sw in the output of the booster ) but the led in the backpanel of the pcimax card lights always!! This led i think it shows the sw level in the output of the pcimax card right?. So why the led shows that i have sw in the output when is connected to the booster ? Is this ok ?
Sir Nigel
Moderator
Moderator
Posts: 334
Joined: Fri Nov 28, 2003 5:07 am
Location: us.gif
Contact:

Post by Sir Nigel »

I think the light just indicates the card is on. It's always lit on mine.
-empty-
drumman
Regular poster
Regular poster
Posts: 30
Joined: Fri Dec 02, 2005 1:19 am

Light On The Back

Post by drumman »

Hello,
The light on the back is just to let you know the unit is on, there are 2 leds on the card itself if you open up you computer that light up do to over modulation and I think audio peaks you want those lights not to come on no more than they have too I have mine set to were they just do flicker when my meters on my SAM3 software reach 0db.

hope this helps
Post Reply