Max Pro III - RDS Issue

All posts related to RDS MAX 1.0 and 2.0 go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
John
New registered user
New registered user
Posts: 9
Joined: Sun Jan 22, 2006 9:39 am

Max Pro III - RDS Issue

Post by John »

Hi, Jusr recently purchased the Max III 15w Transmitter with RDS. It runs from RDS Max V3.0. My issue is that the computer needed to run the software has 2 coms ports 8 and 9. The software needs comms ports 1 to 4. Is there any way I can alter to have comms ports 8 or 9 included in the list of available ports?
User avatar
Davey C
Regular poster
Regular poster
Posts: 35
Joined: Tue Jan 17, 2006 1:32 am

Post by Davey C »

Im sure you could, you could alway try a converter from a serial port socket to a usb socket. That should do the job.
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

There sure is.

Open regedit and search for: RDS MAX v 3.0
Open the key under it, named pcs electronics

There are all of the settings rds max program saves into registry.

Look for comselected and click on it, enter 5-8, enter and close
registry. Should work. Do not open setup now in program or it'll
jump back to 1-4.
I'll add more com ports with new version, fot the time being this
should be a 100% fix.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
John
New registered user
New registered user
Posts: 9
Joined: Sun Jan 22, 2006 9:39 am

RDS Port Issue

Post by John »

Thanks Mark your solution has worked fine!

John
Post Reply