bolts is used in port COM1 to rds?

All posts related to RDS MAX 1.0 and 2.0 go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
eduardi
Regular poster
Regular poster
Posts: 20
Joined: Mon Jan 24, 2005 5:30 pm

bolts is used in port COM1 to rds?

Post by eduardi »

i need to increase the cable that binds of the COM1 to the rds, 20 meters , what bolts is used?
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Bolts?

Its a RS232 extension cable, no bolts involved :)
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
eduardi
Regular poster
Regular poster
Posts: 20
Joined: Mon Jan 24, 2005 5:30 pm

Post by eduardi »

i now is a RS232 extension cable, but i dont have rs232 to 20 or 30 meters, but to make the extencion i only have 8 cables and the RS232 use more cables
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Only 2 cables are used in RDS MAX 20. I think pin 2 and pin 5.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Jannoo
New registered user
New registered user
Posts: 2
Joined: Tue Mar 07, 2006 6:41 am

I know that it is 3-tx and 5-ground

Post by Jannoo »

I know that it is 3-tx and 5-ground
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

3 and 5
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply