im a rody 4 a gnarly band and also backing singer n guitarst n i want to make a wireless system for my guitar i already have schematics for a transmitter but what about a reciever that would connect to a guitar amplifier or pa?
please help me n im fairly good at electronics actually im pretty good so dont hold back please help me i have a receiver but its dodgy the schematics dont look right please help me soon
guitar wireless reciever schematic please help me i need one
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
-
- New registered user
- Posts: 1
- Joined: Wed Jun 22, 2005 8:39 pm
-
- New registered user
- Posts: 1
- Joined: Thu Aug 04, 2005 10:39 pm
sweet
Could I get these schematics as well? should prove to be a great project
mrdatahead@comcast.net
THanks!
~thepentium
mrdatahead@comcast.net
THanks!
~thepentium
Hey guys I need some help with this topic also. I could use the both schematics if possible, but mainly the one for the transmitter. My transmitter at the 1/4 in jack has a resister inline between the center conductor and the jack and also between the ground shield and the jack. Also there's a cap between the two. ALL 3 of these componets' legs have broken off too short to solder back and I can't find the parts. The resisters are 0 ohms. So what the hell are they for? Does anyone know their purpose?
-
- New registered user
- Posts: 1
- Joined: Thu Mar 29, 2007 5:28 pm
google is truely your friend.
enjoy.
http://www.talkingelectronics.com/proje ... MkIII.html
here are some other cool schematics: http://www.satsleuth.com/schematics.htm
enjoy.
http://www.talkingelectronics.com/proje ... MkIII.html
here are some other cool schematics: http://www.satsleuth.com/schematics.htm