linking it using a microwave (band x) link system.
Connected the rds to my pc, added all my stations info on to it.
Plug rds into link box, audio into the rds, and the rds out into the link box.
a very loud high pitched sound is over the audio, but the rds writing works ok. So turned the RDS LEVEL right down, the rds still works, but with a slight high pitched sound,
but either side of our frequency eg, 102.3 and 102.5 there is VERY loud high pitched noise
so put a 10k resistor in parralle with the 22k.
this stopped all the high pitched sound etc. brilliant, however the rds writing wasn't coming out, and on my tuner the RDS and TP lights wouldnt light up, so turned the rds level right up, and just about lit the RDS and TP lights, but they flickered, however no RDS writing was visable. Also no high pitched sound either side of my frequency
I pluged the audio in to the RDS OUt and the rds out lead which would go into the link box into the AUDIO in, so basicly ive got the audio in running into the link box. so no audio come out, but the rds worked fine, RDS TP lit up, with full writing etc. but obviously no audio as the connections are the wrong way around.
![:oops:](./../images/smilies/icon_redface.gif)
so, for now running with out RDS. which is disapointing! please help