RDS ON THE PCI MAX

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
Gerard
New registered user
New registered user
Posts: 2
Joined: Sun Apr 10, 2005 3:53 pm

RDS ON THE PCI MAX

Post by Gerard »

WHO HAVE THE RDS WORKING ON THE PCI MAX ?????
MY TRANSMITTER IS WORKING WEL BUT IT LOOKS LIKE THE RDS TO BUT THE RDS IS NOT TRANSMITTING
ALSO MY PCI MAX HAVE 100 khz STEPS AND NOT 50 Khz AS WRITING IN THE ADVERTISEMENT
WHAT IS MUST DO TO HAVE AT LEAST MY RDS WORKING
GREETINGS GERARD
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

You will shortly receive a small daughter board for your
pci max card. You will need to install that small board on
your pci max card to make it rds capable. Installation will
take about 5 minutes.

A driver will also be available for download by the end of
the week.

Updated instructions should also be available shortly, probably
by the end of week.

This adapter board also makes it possible to use new LCD
display board, which also makes it possible to set RDS parameters
with menu system (as well as power and frequency).

PCI MAX has a PLL which has 50KHz steps, but the interface
(windows program) only uses every second step.
No radio station is allowed to operate at the 50KHz, check the
dial on your radio and you will see.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply