PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
general questions: model, software, and output power

 
Reply to topic    PCS-Electronics Forum Index » Users share experience... View previous topic
View next topic
general questions: model, software, and output power
Author Message
zurn
New registered user
New registered user


Joined: 08 Apr 2005
Posts: 16
Location: Albuquerque, NM

Post general questions: model, software, and output power Reply with quote
Hi there,

I just received my PCI MAX card--thanks!!

In general it worked great with little effort. I'm just trying to get simple reception within my small (1200 sqft) house and yard, and it seems to have done that even with the simple antenna, so that's great.

My questions are around the version of the card and software: the card itself was stamped with 'PCI MAX 2004 RDS' and the software also says '2004.' It's working well enough as is, but i understood there to be some improvements to the 2005, so am i missing out on anything?

Same goes for the software: it just doesn't look as pretty as the screen shot on the page:
http://www.pcs-electronics.com/en/products.php?sub=pc_fm_trans

Is there an update for that?

All of this really leads up to the only minor problems and questions i have. I don't see anywhere on the software to adjust the output power. Since i only need it for a pretty small space, i want to make sure the FCC doesn't notice! There's a little slider next to the frequency adjuster, but it seems to have little effect on anything, and doesn't really display anything either. Is that it? And is there some guideline on adjusting it?

Then, i had some trouble adjusting the volume. To make it as loud as other radio stations, i would turn both my WAV and speaker vol all the way up (this is how i would normally do it when using wires), but then i would hear some distortion on downbeats of music and other louder portions. Do i simply have to find a happy medium volume, or is there something else i can adjust to eliminate that?

Then--this isn't really a problem, but just wondered about it: i was adjusting the equally short/small antenna on my main receiver, and at first i had a lot of ambient fuzz/noise. Then suddenly, it sort of just popped off, and was completely clear. It continued to work fine with no interruption or reverting back to the former fuzz, but i'm just wondering why this would happen. In then end, i imagine that to ensure good reception i need a better antenna, but just wondered about that.

Thanks for any help or advice!

_________________
-steve
Fri Apr 08, 2005 3:46 pm View user's profile Send private message
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » Users share experience... All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group