Cyber max and 300 w amplifier

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
chucky797
New registered user
New registered user
Posts: 2
Joined: Tue Jan 18, 2005 2:41 am

Cyber max and 300 w amplifier

Post by chucky797 »

i wanted to know if the 300W RF amplifier could hook up to the CYBER MAX LCD - STEREO RDS. also how would the cyber max lcd hook up to the amplifier. what kind of connection. i would use the HIGH GAIN 3/4 wave vertical antenna. thanks
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

It could be, of course, wirring diagram is shipped with each amp.

The antenna is excellent selection, you can expect some serious
range with this setup.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
chucky797
New registered user
New registered user
Posts: 2
Joined: Tue Jan 18, 2005 2:41 am

Post by chucky797 »

would i have to solder the amp to the transmitter
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

There are soldering terminals for the coaxial cable.

So yes, there is a minimal amount of soldering involved
in attaching the coaxial cable.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply