can anyone help me please i purchased an rds max it came yesterday and since installing it i have noticed that the messages are all over the place sometimes it skips certain blocks can anyone help me to get it to disply correct every time please as it doesnt make sence most of the time ..
add me to msn if it helps danger@frontlineradiouk.net
thanks in advance for any help.
Help please my rds skips messages
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Note that you have to set delay correctly. if you want certain segment to be skipped set
its delay to zero (0).
Also try updating via PC a few times or power off/wait 2 min/ power on.
Let me know if none of these help.
Marko
its delay to zero (0).
Also try updating via PC a few times or power off/wait 2 min/ power on.
Let me know if none of these help.
Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Skip Messages
I have exacly the same problem.
I can see on the Radio Display, that some letters are skipped or be shown later
Stationname is eg. 11111111
Radio Text is eg. 22222222
Delay 2 s
I would expect that Stationname and Radiotext is altering. But it doesn't
What can be see non the radio display is somehow that
11111 11
11111111
11222111
222 2222
22222222
22111112
11111111
and so on and so on
On the LCD Dispaly of the kit it is displayed correctly.
It has nothing to do with adjustment as I tried everything
Can somebody help
Tim
I can see on the Radio Display, that some letters are skipped or be shown later
Stationname is eg. 11111111
Radio Text is eg. 22222222
Delay 2 s
I would expect that Stationname and Radiotext is altering. But it doesn't
What can be see non the radio display is somehow that
11111 11
11111111
11222111
222 2222
22222222
22111112
11111111
and so on and so on
On the LCD Dispaly of the kit it is displayed correctly.
It has nothing to do with adjustment as I tried everything
Can somebody help
Tim
I would recommend that you don't use too short delay, RDS message takes some time to transfer correctly especially if signal strength is low so if possible use a delay of 3-5.
Marko
Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Station name and radiotext does not alter, these are two completely separate things.
Station name = PS is a 8-character string and you can have a just one static PS all of the time or you can have it change automatically to another PS (there can be up to 100 such PS stored and rotated automatically).
RT is a 64-character string, it is scrolled on the display by receiver.
I will contact you via email and ask for screen shots of your setup.
Station name = PS is a 8-character string and you can have a just one static PS all of the time or you can have it change automatically to another PS (there can be up to 100 such PS stored and rotated automatically).
RT is a 64-character string, it is scrolled on the display by receiver.
I will contact you via email and ask for screen shots of your setup.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128