Can You talk about the procedure for setting up the swr protection on this board, on my board i have the unit connected to the MaxPro 3000 plus . what is a good point in terms of temperature should be the shutdown point?
http://www.pcs-electronics.com/lpf3000- ... -1123.html
PCS 3000LPF
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Well, you have SWR and PWR signals, that's pretty self explanatory.
The swr protection pulls down the swr protection line as swr becomes
higher. This can be used to light a LED diode, pull down bias in amp,
pull down some power disable point in transmitter etc.
It is designed for someone with a bit of experience.
The swr protection pulls down the swr protection line as swr becomes
higher. This can be used to light a LED diode, pull down bias in amp,
pull down some power disable point in transmitter etc.
It is designed for someone with a bit of experience.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128