PCImax 2007+ and Vista

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

How did you run it? You're supposed to unpack the zip file
and than run the setup. If you run the setup.exe from inside
winzip or winrar it only extracts the exe and the other files
are not found.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Wumbel
New registered user
New registered user
Posts: 12
Joined: Fri Nov 23, 2007 1:13 pm

was ok

Post by Wumbel »

Hi

I unzipped it as you said. The three files were extracted.
Then I did run the exe file.
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Whoa, on my test system it went smoothly. Some other people reported success
as well, not sure what the issues are with this one.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Thomas
New registered user
New registered user
Posts: 7
Joined: Sat Nov 24, 2007 10:07 am

Post by Thomas »

Hi again
the external power dind't help still no signal... any chance there's somthing wrong with my card?
what's the next step here? do I send it back ?

best regards
Thomas
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Hi Thomas,

it may be a hw error than, can you drop me an email directly
with a photo of the card?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Wumbel
New registered user
New registered user
Posts: 12
Joined: Fri Nov 23, 2007 1:13 pm

hm

Post by Wumbel »

Hi again

Sometimes the card just don't switch on if I press the power-button.
Is that normal?
It takes several trys before the card starts broadcasting.
What could that be?
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

There is usually delay before a click and power on. When you click wait a few seconds
for the PLL to acquire lock and stabilize.

If you check at the back the power on LED turns on immediately.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Wumbel
New registered user
New registered user
Posts: 12
Joined: Fri Nov 23, 2007 1:13 pm

power

Post by Wumbel »

Hi

Well, sometimes it does not start to broadcast.
Even if I wait. I need to play with the power-switch to get it
to broadcast. If it starts it is all ok and plays fine, but it takes
several trys and if i change the output-power sometimes it just
stops broadcasting.
Weird.
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Looks like the PLL is slow to lock onto frequency.

At least it is not a show-stopper, just a bit annoying.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Wumbel
New registered user
New registered user
Posts: 12
Joined: Fri Nov 23, 2007 1:13 pm

:-)

Post by Wumbel »

Well, I can live with that.
As long as it starts.
Really a great product.
Post Reply