No sound

All posts related to RDS MAX 1.0 and 2.0 go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
asp
New registered user
New registered user
Posts: 7
Joined: Tue Dec 12, 2006 6:07 pm

No sound

Post by asp »

Hello

I have a RDS4000+ unit. RDS works fine, but I have no sound.

I have connected the composite output from an OMB COM LIM 3 unit to MPX IN.
Then, I have connected MPX OUT to the transmitter's MPX IN connector.

I have swapped the cables, just in case one of them is wrong, but the same happens.

Any idea?

Thank you.
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

At the underside of the RCA connectors there should be a bridge connecting the two pins together.
You can email me a photo and I will check for you.

You can also try to re-solder the RCA connector pins from the top layer (not bottom) as there
might be poor contact between top and bottom layer around RCA connectors.

Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
asp
New registered user
New registered user
Posts: 7
Joined: Tue Dec 12, 2006 6:07 pm

Post by asp »

Thank you for your help. This evening I will go to the station and I will check if there is a bridge connecting the pins.
Post Reply