Author |
Message |
drsbecker
New registered user

Joined: 18 May 2007 Posts: 5
|
|
ok im stupid..how the... |
|
I cant get my MAXPRO3+ to tune to 91.9
I dont have the LCD board, so im trying to use the dip switchs.
can somebody PLEASE tell me what postion the 4 dip switchs are suppose to be in as well as the other 8 PLEASE!
i just cant get it to goto 91.9 arrrgggg...
thanks 
|
|
Fri May 18, 2007 12:29 am |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
What can you get it to?
Have you checked the manual?
Marko
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Fri May 18, 2007 10:05 am |
|
 |
drsbecker
New registered user

Joined: 18 May 2007 Posts: 5
|
|
|
|
Hi Marko,
Its not that the unit wont tune there,its that the manual dip switch settings i cant
figure out...so Again, simple question, what position are they (the dip switches) suppose to be in on
both the 4 and the 8 dip switch panels?
thanks,
doc
|
|
Fri May 18, 2007 3:10 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
But have you looked at the manual? It lists dip switches for all freq.
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Fri May 18, 2007 5:27 pm |
|
 |
drsbecker
New registered user

Joined: 18 May 2007 Posts: 5
|
|
|
|
YES! I have but they DO NOT WORK! i get 103.7 instead of 91.9
Maybe im reading the manual wrong..thats why i am asking a SIMPLE
question.... What are the settings for each set of dip switches Please.
|
|
Fri May 18, 2007 5:56 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
The switches follow the simple binary system.
small 4 switches go from 6.25 - 12.5 - 25KHz to 50KHz
The 8 switches go to: 100KHz, 200KHz, 400KHz, 800KHz, 1600KHz, 3200KHz, 6400KHz, 12800KHz
When they're all set to 0, the board transmits at 86MHz. Now whatever you set on the switches
is added to 86000KHz and you've got your frequency.
Follow the examples and you should be able to work it out easily.
If not, there's still LCD unit, which is really easy to use
Do you have a freq. meter or are you using a receiver to figure this out? A receiver
could be tuning into a spurious signal.
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Fri May 18, 2007 10:40 pm |
|
 |
drsbecker
New registered user

Joined: 18 May 2007 Posts: 5
|
|
|
|
hi mark,
could ya give me an example of what dip switches are set "on"
for the 4 & 8 dip switch panels so i can get 91.9
thanks,
scott
|
|
Fri May 18, 2007 11:01 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
Example is there for 100.000 MHz
The settings are also in the table. If I give it to you, it will look
exactly the same as in the table.
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Sat May 19, 2007 10:23 am |
|
 |
drsbecker
New registered user

Joined: 18 May 2007 Posts: 5
|
|
|
|
ok...let me ask you this then...i know where to set the 8 dip switches, for 91.9, but
where do i set the 4 dip switches at?
i just cant figure this out?
|
|
Sat May 19, 2007 2:08 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
What do the instructions tell you to do with 4 small switches?
1,0,0,0
Duh 
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Sun May 20, 2007 9:35 pm |
|
 |
|