SE4 DSP settings

Hi everyone
Just one question: according to the online doc, SE4 DSP threshold can be set at -12dB for example. But mine can only jump to -18dB. So, the compression works a little bit too early... Is there any way to modify this?
Regards

You have to kinda play with the three buttons(UP, DOWN, MENU) to get the settings you want. They seem to be a bit touchy, and you can actually effect several changes with only one "Press" of the button. Try again a couple of times, and you should be able to get it down to -12dB.

I think that the code in the uCPU needs to have a "De-bounce" routine, or if it already has one, the de-bounce delay needs to be increased.

Perhaps Marko will read this post and comment...