Hello, i have a max pro 1 which i built from a kit, now.. it powers up but there is no rf coming out, ive spoke to pcs about this but they cannot help me as such (tho they are very very helpfull)
i was wondering if anybody on here has close up pictures of the board or could possibly take some, just so i can verify what i have done, compare the picture to my board..
Any help would be appreciated,
Thanks
Matt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
www.infinityfm.com | www.pirateradioinfo.co.uk
mattb@infinityfm.com | info@pirateradioinfo.co.uk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MAX Pro 1 ???
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Why is it that we cannot help you?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
-
- New registered user
- Posts: 5
- Joined: Wed Dec 27, 2006 3:55 pm
Maybe the VCO is not working at all.
Do you have any kind of instruments?
Do you have any kind of instruments?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
-
- New registered user
- Posts: 5
- Joined: Wed Dec 27, 2006 3:55 pm
Its hard to work with it. I suspect your VCO is not working, perhaps you mounted
the MOSFET incorrectly. Also, is there a tap on the VCO and is teh 56 ohms resistor
close to VCO coil elevated some 5-10mm above the PCB?
Make a photo and post it somewhere or email it.
the MOSFET incorrectly. Also, is there a tap on the VCO and is teh 56 ohms resistor
close to VCO coil elevated some 5-10mm above the PCB?
Make a photo and post it somewhere or email it.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
-
- New registered user
- Posts: 5
- Joined: Wed Dec 27, 2006 3:55 pm
-
- New registered user
- Posts: 5
- Joined: Wed Dec 27, 2006 3:55 pm
I can't write email here, spammers would get it. I'll pm it to you.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128