palet amplifier cooling
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
- stylzmovement
- Compulsive poster:)
- Posts: 142
- Joined: Sat Oct 11, 2003 8:59 pm
palet amplifier cooling
How do you determine the fan size or required cooling for a given amp, let’s say s 150 watts amp
A fan is not enough for the pallet. You need a large heatsink plus a fan.
Don't forget, pallet amps also require a filter at the exit.
The fan depends on the heatsink size and where its mounted etc so its a guess
game at this point.
2.9W 24V fan will definitely do it.
Don't forget, pallet amps also require a filter at the exit.
The fan depends on the heatsink size and where its mounted etc so its a guess
game at this point.
2.9W 24V fan will definitely do it.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128