PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
Comet tuning

 
Reply to topic    PCS-Electronics Forum Index » Antennas View previous topic
View next topic
Comet tuning
Author Message
Polo_Thug
Regular poster
Regular poster


Joined: 21 Nov 2004
Posts: 24

Post Comet tuning Reply with quote
Followed the advise of some fellow members here on PCS.. While tuning my antenna I run into a few problems....

(1) When I tuning it using the SWR meter I'll get 1.5:1 when touching the antenna, but when i let it go it goes to around 2:1. But its around the lentgh accord to the instruction manual. I drove around and town my reception sucks. And the power output level is around 40 watts.

(2) When tuning the antenna just relying on the SWR meter the best I can acheive is a 2:1 ratio but my reception is better than the above mention situation but with less static. But I get this 2:1 ratio without me touching the antenna .And my power out but is around 55 watts. But the lenght is way off according to the instruction chart.

Now my question is why does it give me a 1.5;1 ratio when touching it and when I let go, it goes back to the SET mark .
Sun Apr 03, 2005 3:28 am View user's profile Send private message
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » Antennas All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group